Bond Coats, Abradables, Modelling and Failure Analysis

Wednesday, May 9, 2018: 1:00 PM-4:10 PM
Tampa 1 (Gaylord Palms Resort )
Ms. Rachel Ambrosi, Boeing and Dr. Rogerio S. Lima, National Research Council of Canada (NRC)
1:00 PM
Investigation of compatibility between M-Cr-Al-X thermal spray coatings and 3rd generation γ-TiAl alloys
Dr. Ivan Mazilin, TSPC Ltd.; Mr. Nikolay Zaitsev, TSPC Ltd.; Mr. Anton Artamonov, TSPC Ltd.; Dr. Lev Baldaev, TSPC LLC; Dr. Andrei Kartavykh, National University of Science and Technology MISIS; Dr. Mikhail Gorshenkov, National University of Science and Technology MISIS; Dr. Andrei Stepashkin, National University of Science and Technology MISIS; Dr. Vladimir Sudarchikov, National University of Science and Technology MISIS; Dr. Sergey Kaloshkin, National University of Science and Technology MISIS
1:20 PM
HVOF Thermal Sprayed Nano-Al2O3 Reinforced MCrAlY Composite Coatings for High Temperature Applications
Dr. Mingwen Bai, University of Nottingham; Mr. Liam Reddy, University of Nottingham; Dr. Tanvir Hussain, University of Nottingham; Mr. Bo Song, University of Nottingham
1:40 PM
Characterization of coatings, failure analysis and corrosion studies using GD-OES
Dr. Matthieu Chausseau, HORIBA Scientific; Mr. Philippe Hunault, HORIBA Scientific; Mr. Kayvon Savadkouei, HORIBA Scientific; Mr. Patrick Chapon, HORIBA Scientific; Dr. Sofia Gaiaschi, HORIBA Scientific
2:00 PM
Aluminizing of HVOF Sprayed CoNiCrAlY on IN738 by Ionic Liquid Electrolytic Deposition – Aluminizing Process and Coating Studies after Heat Treatment in Air
Dr. Martin Thoma, MT Consulting; Mr. Luca Tagliaferri, Turbocoating S.p.A.; Dr. Francesco Bozza, Turbocoating S.p.A.
2:20 PM
Abradable Coatings for Turboprop Engines
Dr. Jindrich Ziegelheim, GE Aviation; Luca Lombardi, GE Aviation; Dr. Zdeněk Česánek, VZU Plzen; Dr. Šárka Houdková, VZU Plzen; Dr. Ladislav Celko, Brno University of Technology; Mr. David Jech, Brno University of Technology; Dr. Zdenek Pala, GE Aviation
2:40 PM
Numerical Modelling of Cold Spray: Predicting Porosity and Residual Stress
Mr. Tyler London, TWI Technology Centre (North East); Dr. Henry Begg, TWI Ltd; Ms. Heidi Lovelock, TWI Ltd; Dr. Philip McNutt, TWI Ltd; Dr. Damaso De Bono, TWI Technology Centre (North East)
3:30 PM
Failure Of Multi-Layer Suspension Plasma Sprayed Thermal Barrier Coatings In The Presence Of Na2SO4 and NaCl at 900 oC
Mr. Krishna Praveen Jonnalagadda, Linköpings university; Mr. Satyapal mahade, Department of Engineering Science, University West; Ms. Stephanie kramer, Linköpings university; Mr. Pimin zhang, Linköpings university; Dr. Nicholas Curry, Treibacher Industrie AG; Dr. Xin-Hai Li, Siemens Industrial Turbomachinery AB; Prof. Ru Lin Peng, Linköpings university
3:50 PM
In-flight analysis and microstructural evaluation of CoNiCrAlY coatings deposited by HVPS
Dr. Felipe Caliari, Technological Institute of Aeronautics; Mr. Felipe Miranda, Technological Institute of Aeronautics; Dr. Alexei Essiptchouk, São Paulo State University; Dr. Danieli Reis, Federal University of São Paulo; Dr. Gilberto Petraconi Filho, Technological Institute of Aeronautics