Ballistic testing at 10psf against 0.30-cal M2 AP at 0º obliquity has determined V50 results showing a Ballistic Mass Efficiency (Em) which exceeds other metallic armors. Ballistic testing at 10psf against 0.30-cal M2 AP at 30º obliquity has shown Flash Bainite far superior against RHA, common High Hard, aluminum alloys, and titanium-6-4. Against 20mm FSP at 10psf, Flash 4130 V50s exceed RHA by 250fps, aluminums by over 500fps, and titanium-6-4 by over 115fps.
Flash Bainite panels have been successfully produced at 5 to 15psf with production costs calculated to be less than all other metallic solutions for a specified level of protection against 0.30-cal M2 AP. Round and rectangular tubing up to 1” have been produced and vehicle tested as entire frame members. Structural section such as I-beams are possible. Ballistic samples 12” x 36” are available for IRAD projects. Widths to 48” will be in production at two facilities planned for late 2010.
Flash Bainite delivers increased Survivability and Structural robustness as a vehicle hull A-Cab solution as required by the DoD Long Term Armor Strategy (LTAS). Applications such as Gunner Protection Kits could be made significantly lighter without compromising Warfighter protection.
![[ Visit Client Website ]](images/banner.gif)