Wednesday, April 20, 2016: 1:30 PM-3:10 PM
Ballroom B (Hyatt Regency Savannah)
Chairs: Mr. Tobias Steiner, CR/APM42, Robert Bosch GmbH, Stuttgart, Germany and Mr. Patrick Jacquot, Bodycote, Pusignan, France
1:50 PM
Influence of stress and strain hardening on gaseous nitriding
Mr. Benjamin Guillot, MSMP Laboratory, Arts et Métiers ParisTech, Aix-en-Provence, France;
Dr. Sébastien Jégou, MSMP Laboratory, Arts et Métiers ParisTech, Aix-en-Provence, France;
Prof. Laurent Barrallier, MSMP Laboratory, Arts et Métiers ParisTech, Aix-en-Provence, France
2:10 PM
Low temperature surface hardening of stainless steel; the role of plastic deformation
Mr. Federico Bottoli, Technical University of Denmark;
Ms. Freja. N. Jespersen, Technical University of Denmark;
Prof. Jesper H. Hattel, Technical University of Denmark;
Prof. Grethe Winther, Technical University of Denmark;
Dr. Thomas Christiansen, Technical University of Denmark;
Prof. Marcel A.J. Somers, Technical University of Denmark
2:30 PM
Effects of Different Microstructural and Hardness Gradients Generated by Single and Combined Surface Treatments with a Nitriding Top Layer
Dr. Anja Buchwalder, TU Bergakademie Freiberg, Institute of Materials Engineering;
Mr. Normann Klose, TU Bergakademie Freiberg, Institute of Materials Engineering;
Prof. Rolf Zenker, TU Bergakademie Freiberg, Institute of Materials Engineering;
Prof. Heinz-Joachim Spies, TU Bergakademie Freiberg, Institute of Materials Engineering;
Mrs. Anne Jung, TU Bergakademie Freiberg, Institute of Materials Engineering
2:50 PM
Optimization of gaseous nitriding of steels by multi-physics modeling
Prof. Laurent Barrallier, MSMP Laboratory, Arts et Métiers ParisTech, Aix-en-Provence, France;
Dr. Sébastien Jégou, MSMP Laboratory, Arts et Métiers ParisTech, Aix-en-Provence, France;
Mr. Guillaume Fallot, Airbus Helicopters, Marignane, France