Opening Keynote Session: IFHTSE 2024 Medalist, Tadashi Furuhara, Institute for Materials Research (IMR), Tohoku University, presents, “Alloying effects on microstructure development in high strength steels – from bulk to surface”.
IFHTSE 2024 Medalist
Tadashi Furuhara
Institute for Materials Research (IMR), Tohoku University
Monday, September 30, 2024 | 1:30 – 2:30 p.m.
“Alloying effects on microstructure development in high strength steels – from bulk to surface”
High strength of low alloy steels are accomplished by addition of interstitial elements (i), mainly carbon and in some case nitrogen. However, further improvement in properties as well as good robustness in heat treatment processes are achieved by additions of substitutional alloying elements (s). Substitutional alloying effects on microstructure formed during heat treatments are of a wide variety in terms of thermodynamics, kinetics as well as crystallography depending upon kinds of steels. These are still very fascinating areas in fundamental and applied physical metallurgy research of steels because of a large unexplored field for applying the current advanced characterization techniques.
In this presentation, two aspects in the interplay between carbon/nitrogen and substitutional alloying elements; (1) alloy partitioning during forward ferrite/bainite transformation from supersaturated austenite matrix, and (2) nanoscale i-s clustering in ferrite or austenite during heat treatments.
The first topic corresponds to control of phase stability of retained austenite in multiphase high strength sheet steels. The degree of carbon enrichment into austenite matrix during ferrite transformation is strongly affected by migration kinetics of ferrite/austenite interphase boundary. Substitutional elements affects strongly on the ferrite growth kinetics with its partitioning and segregation, leading to non-equilibrium partitioning of carbon. Such alloy portioning behaviors are summarized in terms of alloying elements and discussion is extended into lower temperature cases, i.e., on bainite transformation.
The second topic is related to solid solution and precipitation strengthening of alloyed steels. Carbon and nitrogen both have strong tendencies in nano-scale clustering in iron lattice. It has been shown recently that such interstitial elements (i) form co-clusters with substitutional alloying elements (s) having strongly attractive interactions with carbon and nitrogen, leading to nano-precipitation of alloy carbides and nitrides. As typical examples, nanoscale i-s clustering in nitrided steels as well as interphase precipitation of nanoscale alloy carbide in low alloy ferritic steels are explained and discussed.