Home      Exposition      To Register      ASM Homepage
 Back to "Poster Program" SearchBack to Main Search
Posters
Location: Virginia City III (Flamingo Las Vegas Hotel)
(Please check final room assignments on-site).
Session Description:

Session Chair:Dr. Joachim Heberlein University of Minnesota, Minneapolis, MN
 Research on Plasma Sprayed High Crystallinity Degree Hydroxyapatite Powder for Biological Coating
 Wear and Corrosion Behaviour of HVOF-Sprayed WC-CoCr Coatings on Al Alloys
 Studies on the Sliding Wear Performance of Plasma Spray Ni-20Cr and Ni3Al Coatings
 Effects of Heat Treatment on the Mechanical Properties of Plasma Pray 316L Coatings
 Studies on the Role of Cold Spray Ni-20Cr and Ni-50Cr Coatings to Reduce Wear of T-22 and SA-516 Steels
 Reduction of Oxide Content in Plasma Sprayed Coating
 Low Cost HVAF for Thermal Spraying of WC-Co
 Can the Sulzer Mectco DJ Air-Cooled HVOF Thermal Spray Be Used to Produce Bio Ceramics HA Coatings?
 Particle Image Velocimetry Diagnostics for Suspension Plasma Spraying
 Heat Flux Controls by in Situ Laser Treatment on Thermal Sprayed Wc-Co Coatings
 Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis
 Optimized Arc Wire Sprayed Fiber Prepregs for Advanced Manufacturing of Metal Matrix Composites (MMC)
 Characterization of Boron Carbide Thermal Sprayed Coatings for High Wear Resistance Performance
 Laser Spraying of Fe-Based Amorphous Alloy Powders
 Fabrication and Property of Nanostructured Ysz/nicraly Thermal Barrier Coating
 Axial Plasma Spraying Slurry Coatings for Various Emerging Applications
 Microstructure and Wear Resistance of TiB2-Fe Matrix Coating Deposited by Atmosphere Plasma Spray
 Splat-Substrate Interactions in Plasma Sprayed Ni-Cr Powders on Polished Metal Substrates
 The Influence of Spray Conditions on Deposition Characteristics of Aluminum Coatings in Cold Spraying
 A Case Study of Arc-Spray Tooling Process for Production of Sheet Metal Forming Dies
 The Influence of Spray Parameters on the Characteristics of Al2O3 Particle and the Coating Sprayed by the Detonation Spray
 The Development of High Temperature Gas Heater in the Cold Spray Coating System
 Characterization of in-Situ Synthesized WC-Co Powder and Its HVOF Sprayed Coating
 Study of Ceramic Coatings as a Novel Optical Imaging Tracking Material Using Plasma Spray
 The Bonding Mechanism of WC-12Co Coatings Prepared by Supersonic Plasma Spraying
 Coatings Structure of Nano-Zirconia Elaborated by Plasma Spray Sol Process
 Gas-Abrasive Resistance of Arc Sprayed Dispersion-Hardened Coatings Obtained from Iron-Based Cored Wires
 Influence of Improved Plasma Gun on the Particle in-Flight Properties
 Comparison of in-Flight Particle Properties, Splat Formation, and Coating Microstructure for Regular and Nano-YSZ Powders
 Gas-Abrasive Resistance of Arc Sprayed Dispersion-Hardened Coatings Obtained from Iron-Based Cored Wires
 Deposition Behavior of Copper Particle Onto Flat Substrate Surface in Cold Spraying
 Mechanical Properties Influence on the Tribological Behavior of Flame Spraying Al2O3-TiO2 and WC-NiFeCr Coatings
 Improvement of Impact Resistance of WC-Cr3C2-Ni Based Coatings by Means of Hardness Control of Undercoat
 Testing Method of Spalling Resistance for Thermal Barrier Coating by Thermal Cycle and Thermal Shock
 Thermally Sprayed Amorphous and Nanostructured Iron-Based Coatings with Particle Reinforcement
 Development of Nanostructured Iron Based Alloys with Improved Corrosion Resistance for Thermal Spray Applications
 Plasma-Sprayed TiN Coatings in a Reactive Nitrogen Atmosphere with Pure Titanium Wire
 Heat Transfer Modeling of An F4 Plasma Gun
 Atmospheric Plasma Spraying (APS) Low-Temperature Cathode Materials for Solid Oxide Fuel Cells (SOFCs)
 Cold Spray Multilayer Composite Coatings for Iron and Steel Castings
 Structure Formation of Low Pressure Cold Spray Coatings: A Powder Shock Consolidation Process Simulation
 Novel near Nano-Scale Overlays for High Wear Applications
 Development of Electrolytes for SOFC by HFPD Detonation Spraying
 Deposition of Alloyed HCP Metals through Kinetic Spray Process
 Reliability and Safety Study for Severe Environment Exposed Thermal Spray Coatings
 The Electrical and Mechanical Properties of Kinetic Sprayed Carbon Nanotube Aluminum Composite Coating
 Deposition Characteristics of Diamond Enhanced by Plastically Deformed Nickel Layer in Kinetic Sprayed Bronze/Diamond Composite Coating
 Development of Kinetic Sprayed Coatings for the Application of Die Soldering Resistance
 The Effect of Crystallinity and Microstructure on Corrosion Resistance of Atmospheric Plasma Sprayed Cu-based Bulk Metallic Glass Coating
 Influence of Plasma Parameters on the Corrosion Resistance and Microstructure of WC-10%Co Coatings
 Corrosion Resistance of Post Heat Treated HVOF Coatings Based on Cermet-Ni Based Alloys Mixture
 Interfacial Indentation to Determine the Adhesion of WC-Co-NiCr Thermal Spray Coatings
 Mechanical and Tribological Performance of PEEK Coating Deposited by Flame Spraying-Laser Remelting Hybrid Process
 Antibacterial Property and Biocompatibility of Plasma Sprayed Hydroxyapatite / Silver Composite Coatings
 Study on the Application of Electric Arc Sprayed Duplex Coatings CrNi - Al for Anticorrosion Protection of Carbon Steel in Aqueous Acid Media
 Study on the High Temperature Resistance of An Arc-Sprayed Chrome-Nickel Coating
 Sliding and Abrasive Wear Behavior of Mo-Ni Plasma Sprayed Coatings
 Microstructure and Properties of Mg-Cu Amorphous Powders Fabricated by Mechanical Alloying
 Thermomechanical Evaluation and Thermal Expansion Behavior of Plasma-Sprayed Thermal Barrier Coatings
 Microstructural Characterization and Correlation with Mechanical Properties of Plasma-Sprayed Zirconia Coatings
 Industrial Applications for Polymers with Release Properties in Combination with Thermal Spray Coatings
 Reproducibility Assessment of Plasma Spraying through Elastic Behavior Analysis of YSZ Coatings
 Percolation Study in Thermally Sprayed Al2O3-Ni Reinforced Composites
 Induction Plasma Synthesis of Dense Oxide Ion Layers for Reverse Combustion in the Anhydrous Molten Salt Na–B-O-H System
 Nano-Intermetallic Powders Produced by Induction Plasma Synthesis
 Characterization of metallic powders atomized using a De Laval nozzle
 Effects of Some Light Alloying Elements on the Oxidation Behavior of Ni-Cr based and Fe-based alloys during Air Plasma Spraying
 Effect of High Temperature Calcination on the Phase Composition of Nanostructured and Conventional Zirconia Thermal Barrier Coatings
 Effect of Water Vapor on EBCs Which Have Top Coat Various Bonded and Free Silicates
 An Overview on Erosion of Hydraulic Turbine Materials and Thermal Spray Erosion Resistant Coatings
 A Comparative Study on Hot Corrosion Resistance of Several Types of Thermal Barrier Coatings: YSZ, CSZ, Mullite and YSZ+Al2O3
 Optimization of Plasma Spraying Process Parameters for Yttria Stabilized Zirconia Coatings
 Microstructure and Thermal Cycling Behaviour of Atmospheric Plasma Sprayed Thermal Barrier Coatings with High Segmentation Crack Densities
 a Study of Oxidation Kinetics of NiCoCrAlYTa Coating on Ni-Based Single Crystal Super-Alloy