Hard & Wear Resistant Coatings - Session II

Wednesday, May 15, 2013: 8:00 AM-10:00 AM
C105 (Busan Exhibition and Convention Center)
8:00 AM
Thermally Sprayed Boron Nitride Coatings
Mr. Fahmi Mubarok, NTNU; Sergio Armada, SINTEF Materials and Chemistry; Inaki Fagoaga, INASMET Tecnalia; Nuria Espallargas, NTNU
8:20 AM
Microscopic Characteristics and Mechanical Properties of Plasma Sprayed Al2O3 Coatings
Mr. Takashi Sakoda, TOCALO Co.,Ltd.; Mr. Mitsuharu Inaba, TOCALO Co., Ltd.; Mr. Kensuke Taguchi, TOCALO Co.,Ltd
8:40 AM
Amorphous Phase Formation in Plasma-Sprayed Alumina Coatings
Ms. Er-Juan Yang, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Prof. Guan-Jun Yang, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Jing Shi, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Cheng-Xin Li, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Prof. Chang-Jiu Li, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University
9:00 AM
Structure and Properties of Thermally Sprayed Alumina-Chromia Coatings Deposited by Plasma and HVOF Spray Technologies
Prof. Petri Vuoristo, Tampere University of Technology; Dr. Lutz-Michael Berger, Fraunhofer IWS; Mr. Stefan Scheitz, Fraunhofer Institute for Material and Beam Technology (IWS); Dr. I. Shakhverdova, Fraunhofer Institute for Material and Beam Technology (IWS); Mr. Leo Hyvärinen, Tampere University of Technology; Mr. Ville Matikainen, Tampere University of Technology; Dr. Kari Niemi, Tampere University of Technology; Dr. Heli Koivuluoto, Tampere University of Technology
9:20 AM
Fabrication of Dense Ceramic Coatings by Using HVOF Spraying
Dr. Jin-Hong Kim, RIST; Dr. Byeong-Geun Seong, RIST; Dr. Hyung-Jun Kim, RIST
9:40 AM
Microstructure and Wear Resistance of Thermally Sprayed and Welded Coatings Using Conventional and Nanostructured Materials
Prof. Carlos R. C. Lima, UNIMEP - Methodist University of Piracicaba; Mrs. Bianca V Bette, UNIMEP - Methodist University of Piracicaba; Mr. Flávio Camargo, OGRAMAC Surface Engineering; Prof. Hipólito C Fals, Universidad de Oriente; Prof. Valtair A Ferraresi, UFU - Federal University of Uberlândia
10:00 AM