TBCs Engineered via Suspensions & Solutions

Monday, May 7, 2018: 8:00 AM-12:10 PM
Tampa 1 (Gaylord Palms Resort )
Mr. Brian Hazel, Pratt & Whitney USA and Dr. Rogerio S. Lima, National Research Council of Canada (NRC)
8:00 AM
Viable SPS Solutions for Aeroderivative Gas Turbine Engines
Dr. Christopher Petorak, Praxair Surface Technologies; Dr. Albert Feuerstein, Praxair Surface Technologies, Inc.
8:20 AM
Suspension sprayed YSZ thermal barrier coatings: on the road to industrial application
Dr. Maria Barbosa, Technische Universität Dresden; Dr. Omar Ligabue, Turbocoating S.p.A.; Mr. Nick Kulissa, Fraunhofer Institute IWS; Mr. Simone Bursich, Turbocoating S.p.A.; Dr. Filofteia-Laura Toma, Fraunhofer Institute IWS; Dr. Denise Beitelschmidt, Fraunhofer Institute IWS; Mr. Luca Tagliaferri, Turbocoating Corp.
8:40 AM
Effect of spray parameters on porosity and lifetime of suspension plasma sprayed thermal barrier coatings
Prof. Nicolaie Markocsan, University West; Dr. Mohit Gupta, University West; Dr. Xin-Hai Li, Siemens Industrial Turbomachinery AB; Mr. Björn Kellman, GKN Aerospace Sweden AB; Mr. Omkar Aranke, University West; Mr. Ashish Ganvir, University West, Trollhattan, Sweden
9:00 AM
A Comparative Study of Ready to use YSZ suspensions and coatings
Dr. Fariba Tarasi, Concordia University; Mrs. Elnaz Alebrahim, Concordia University; Prof. Ali Dolatabadi, Concordia University; Prof. Christian Moreau, Concordia University
9:20 AM
The Application Of Laser Texturing To Control The Microstructure And Performance Of SPS Thermal Barrier Coatings
Dr. Pawel Sokolowski, Wrocław University of Technology; Mr. Robin KROMER, IRTES-LERMPS institute; Mrs. Sophie Costil, ICB-LERMPS, Univ. Bourgogne Franche-Comté, UTBM; Prof. Lech Pawlowski, University of Limoges
9:40 AM
10:30 AM
Suspension Plasma Spray And Performance Characterization Of New Thermal Barrier Coatings
Mr. Nelso Antolotti, Turbocoating S.p.A.; Mr. Enea Ghidini, Turbocoating S.p.A.; Dr. Omar Ligabue, Turbocoating S.p.A.; Mr. Luca Tagliaferri, Turbocoating Corp.; Mr. Simone Bursich, Turbocoating S.p.A.; Dr. Francesco Bozza, Turbocoating S.p.A.
10:50 AM
Microstructural Characterization and Room Temperature Erosion Behaviour of As-deposited SPS, EB-PVD and APS YSZ-based TBCs
Dr. Rogerio S. Lima, National Research Council of Canada (NRC); Dr. Bruno M. H. Guerreiro, National Research Council of Canada (NRC); Dr. Maniya Aghasibeig, National Research Council of Canada (NRC)
11:10 AM
Phase Stability, Fracture Toughness and Thermal Cycling Behavior of Supersonic Suspension Plasma Sprayed Scandia-Yttria Co-doped Zirconia Thermal Barrier Coatings
Dr. Wei Fan, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Prof. Yu Bai, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Ms. Yongxia Kang, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Dr. Lei Zhang, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Prof. Benqiang Li, Department of Mechanical Engineering, University of Michigan.
11:30 AM
Characterization of Thermal Property of YSZ Coatings Deposited by Suspension Vacuum Plasma Spraying
Mr. Yeonwoo Yoo, Korea Institute of Materials Science; Dr. Eungsun byon, Korea Institute of Materials Science
11:50 AM
Suspension and Sol Plasma Spraying of a Complex Ba(Mg1/3Ta2/3)O3 Perovskite: Effect of Precursor Chemistry
Mr. Huidong Hou, Beijing Institute of Technology; Prof. Jocelyn Veilleux, Université de Sherbrooke; Prof. François Gitzhofer, Université de Sherbrooke; Prof. Quansheng Wang, Beijing Institute of Technology; Prof. Ying Liu, Beijing Institute of Technology