Engineering, Protection and Repair of Aircraft Structural Parts II

Wednesday, May 9, 2018: 8:00 AM-11:10 AM
Tampa 1 (Gaylord Palms Resort )
Mr. Matthew Carey, Cincinnati Thermal Spray and Dr. Zhaolin Tang, Northwest Mettech Corp.
8:00 AM
Organic composite metallization using Low Pressure Cold Spraying
Prof. Hanlin LIAO, ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90100 Belfort, France; Mrs. Sophie Costil, ICB-LERMPS, Univ. Bourgogne Franche-Comté, UTBM; Mr. vincent Gillet, Université de Nantes; Ms. Emilie Aubignat, ICB-LERMPS, Univ. Bourgogne Franche-Comté, UTBM; Mr. Bruno Courant, Université de Nantes; Prof. Cecile Langlade, ICB-LERMPS, Univ. Bourgogne Franche-Comté, UTBM; Mr. Pascal Casari, Université de Nantes; Mr. Wolfgang Knapp, Fraunhofer Institut fur Lasertechnik
8:20 AM
Nanostructured CVD Tungsten Carbide Coating on Aircraft Actuators and Gearbox Shafts Reduces Oil Leakage and Improves Durability
Dr. Yury Zhuk, Hardide Coatings Ltd
8:40 AM
Electrochemical Deposition and Evaluation of Electrically Conductive Polymer Coating on Fiber Reinforced Polymers.
Mr. Alejandro Francisco Garcia Galvan, UNAQ
9:00 AM
Carbon-carbon composite protection against oxidation in supersonic flame stream
Mr. Nikolay Zaitsev, TSPC Ltd.; Dr. Lev Baldaev, TSPC LLC; Dr. Ivan Mazilin, TSPC LLC; Dr. Viacheslav Nikolaevich Anikin, National University of Science and Technology MISIS; Mr. Dmitriy Yurievich Sinitsyn, National University of Science and Technology MISIS
9:20 AM
Nondestructive Evaluation and Analysis of Thermal Sprayed Coatings: Latest Technology Progresses and Case Studies
Dr. Xinqing Ma, Curtiss-Wright Corporation; Mr. Peter Ruggiero, Curtiss-Wright Corporation
9:40 AM
Study of mechanical performance and residual stress in Kinetic Metallization™ WC-Co coatings
Dr. Andrew S.M. Ang, Swinburne University of Technology; Dr. Vladimir Luzin, Australian Nuclear Science and Technology Organisation; Mr. Travis Crowe, Inovati; Mr. Howard Gabel, Inovati; Prof. Christopher C. Berndt, Swinburne University of Technology
10:00 AM
Refreshment Break, Exhibit Halls A-E
10:30 AM
Modification of a low pressure plasma sprayed Ni-Ti coating by post-spray heat treatment and cryogenic treatment
Dr. Chunjie Huang, ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90100 Belfort, France; Ms. Marie-Pierre Planche, UBFC, ICB-PMDM-LERMPS UMR6303; Dr. Christophe Verdy, University of Technology of Belfort-Montbéliard; Prof. han Lin Liao, UBFC, ICB-PMDM-LERMPS UMR6303; Prof. Ghislain Montavon, ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90100 Belfort, France
10:50 AM
Fabrication of Cold-Sprayed Ceramic Y2O3 Coatings
Dr. Lingyan Kong, Institute of metal research, CAS
See more of: Advanced Coatings for the Aerospace Industry (joint symposium with AeroMat)
<< Previous Session | Next Session >>