Functional Coatings

Tuesday, May 28, 2019: 09:00-12:20
Annex Hall/F201 (Pacifico Yokohama)
Prof. Fardad Azarmi, North Dakota State University
09:00
Fabrication of Yttrium-Aluminum-Garnet:Dysprosium Phosphorescent Coating Using the Aerosol Deposition Technique
Dr. Jacob Mahaffey, Sandia National Laboratories; Dr. Kathryn Hoffmeister, Sandia National Laboratories; Mrs. Wendy Flores Brito, Sandia National Laboratories; Dr. Andrew Vackel, Sandia National Laboratories
09:20
Study of transition metal oxides for thermoelectric applications using plasma spray additive manufacturing
Dr. Felipe Caliari, Center for Thermal Spray Research, Stony Brook University, Stony, NY; Mr. Hwasoo Lee, Stony Brook University; Prof. Sanjay Sampath, Center for Thermal Spray Research, Stony Brook University
09:40
Thermal sprayed aluminum coatings on carbon fiber reinforced Magnesium
Mr. Tino Mrotzek, Technische Universität Dresden; Mr. Jan Conde-Wolter, Technische Universität Dresden; Mr. Thomas Behnisch, Technische Universität Dresden; Prof. Maik Gude, Technische Universität Dresden; Dr. Maria Barbosa, Fraunhofer Institute for Material and Beam Technology IWS; Mr. Davide Schultz, Fraunhofer Institute for Material and Beam Technology IWS; Mr. Stefan Scheitz, Fraunhofer Institute for Materials and Beam Technology; Prof. Christoph Leyens, Fraunhofer Institute for Materials and Beam Technology, IWS
10:00
Influence of particle size and spray parameters on structural, mechanical and electrical insulation properties of alumina coatings by atmospheric plasma spraying
Mr. Toshiyuki Yamane, Oerlikon Metco Japan; Mr. Kazuya Fujimori, Oerlikon Metco Japan; Dr. Junya Kitamura, Oerlikon Metco Japan; Dr. Tetsuyoshi Wada, Oerlikon Metco Japan
10:20
Morning Refreshment Break
11:00
Use of Alternative Process Gases and Modifications for Manufacturing Heating Elements by Arc Spraying
Mr. Michél Hauer, Fraunhofer Research Institution for Large Structures in Production Engineering IGP; Mr. Benjamin Ripsch, Fraunhofer Research Institution for Large Structures in Production Engineering IGP; Mr. Werner Krömmer, Linde Gas Division, Linde AG; Prof. Knuth Michael Henkel, Faculty for Mechanical Engineering and Marine Technology, University of Rostock
11:20
Microstructural and Performance Analyses of Thermal-Sprayed Electric Resistance Heating Systems Deposited onto Steel Pipes as De-Icing Elements
Mr. Milad Rezvani Rad, University of Alberta; Ms. Morvarid Mohammadian Bajgiran, Concordia University; Prof. Christian Moreau, Concordia University; Prof. André McDonald, University of Alberta
11:40
Techno-Economic Assessment of Coating-Based Resistive Heating Systems versus Conventional Heat Tracers
Mr. Milad Rezvani Rad, University of Alberta; Mr. Kingsley Ngaokere, University of Alberta; Mr. Daniel C. hayden, Hayden Corporation; Prof. Amit kumar, University of Alberta; Prof. André McDonald, University of Alberta
12:00
An Experimental Study of the Performance of Flame-Sprayed Ni-Based Metal Matrix Composite Coatings as Resistive Heating Elements
Mr. Shahed Taghian Dehaghani, University of Alberta; Prof. Ali Dolatabadi, Concordia University; Prof. André McDonald, University of Alberta
See more of: Applications
<< Previous Session | Next Session >>