Protective Coatings - Wear I

Tuesday, May 28, 2019: 13:30-16:10
Annex Hall/F202 (Pacifico Yokohama)
Dr. Georg Mauer, Forschungszentrum Jülich GmbH
13:30
Parameter study of Cr2O3 suspensions for suspension plasma sprayed chromia coatings for wear resistant application
Mr. Johann Susnjar, Treibacher Industrie AG; Dr. Richard Trache, Technische Universität Dresden; Dr. Nicholas Curry, Treibacher Industrie AG
13:50
Tailoring Thermal Properties of Plasma Spray Ceramic Coatings for Aluminum Molding
Dr. David Levasseur, Centre de metallurgie du Quebec; Mr. Jimmy Simard, Centre de metallurgie du Quebec; Dr. Franco Chiesa, Centre de metallurgie du Quebec
14:10
Improvement of Wear Resistance by Thermal Spraying of Surface Layers prepared by Plasma Transferred Arc Welding on Gray Cast Iron Components
Mr. Ben Heider, TU Darmstadt, Center for Structural Materials; Mr. Erick Gonzáles Olivares, RWTH Aachen, Welding and Joining Institute; Mr. Erik Zokoll, RWTH Aachen, Welding and Joining Institute; Dr. Tom Engler, TU Darmstadt, Center for Structural Materials; Dr. Jörg Ellermeier, TU Darmstadt, Center for Structural Materials; Mr. Rahul Sharma, RWTH Aachen, Welding and Joining Institute; Prof. Matthias Oechsner, TU Darmstadt, Center for Structural Materials; Prof. Uwe Reisgen, RWTH Aachen, Welding and Joining Institute
14:30
Investigation of coating properties in the Al2O3 - TiO2 system obtained by thermal spraying with feedstock powders and water-based suspensions
Mrs. Monika Michalak, Fraunhofer Institute for Materials and Beam Technology, IWS; Dr. Filofteia-Laura Toma, Fraunhofer Institute for Materials and Beam Technology, IWS; Dr. Maria Barbosa, Fraunhofer Institute for Materials and Beam Technology, IWS; Dr. Pawel Sokolowski, Wrocław University of Technology; Dr. Leszek Latka, Wrocław University of Technology
15:30
A new way to in-situ synthesize Rutile TiO2 coating
Dr. xiujuan Fan, UBFC, ICB-PMDM-LERMPS UMR6303; Mr. Geoffrey Darut, UBFC, ICB-PMDM-LERMPS UMR6303; Ms. XIAOHUA FENG, UBFC, ICB-PMDM-LERMPS UMR6303; Dr. Chen Song, UBFC, ICB-PMDM-LERMPS UMR6303; Prof. Marie-Pierre Planche, UBFC, ICB-PMDM-LERMPS UMR6303; Prof. han Lin Liao, UBFC, ICB-PMDM-LERMPS UMR6303; Prof. Ghislain Montavon, UBFC, ICB-PMDM-LERMPS UMR6303
15:50
Effect of high temperature (550oC) on tribological properties of Eco-friendly carbon based composite coating for piston ring application
Mr. Ankit tyagi, Delhi Technological University; Prof. R.S. Walia, Punjab Engineering College; Prof. Qasim Murtaza, Delhi Technological University
See more of: Applications