Engineering & Testing of TBCs, Bond-coats, EBCs and Abradables II-a

Tuesday, May 25, 2021: 8:00 AM-10:00 AM
Molly O'Connor, Linde and Mr. Matthew R. Gold, Rolls-Royce
8:00 AM
Effect of Plasma Characteristics on the Composition and Properties of Silicate Environmental Barrier Coatings
Dr. Eugenio Garcia, Center for Thermal Spray Research, Stony Brook University; Mr. Edward J. Gildersleeve V, Ph.D. Candidate, Center for Thermal Spray Research, Stony Brook University; Prof. Sanjay Sampath, Center for Thermal Spray Research, Stony Brook University
8:15 AM
"Evaluation of next generation rare earth silicate EBC coatings "
Dr. Alain Allimant, Saint-Gobain Research Provence; Mr. Stéphane Raffy, Saint-Gobain Research Provence
8:30 AM
Thermal Spray Deposited Hafnia-Silicon Bond Coats for Protection of SiC/SiC CMCs
Dr. Emine Bakan, Forschungszentrum Jülich GmbH; Dr. Yoo J. Sohn, Forschungszentrum Jülich GmbH; Prof. Dietmar Koch, University of Augsburg; Prof. Robert Vaßen, Forschungszentrum Jülich GmbH
8:45 AM
Processes and properties of environmental barrier coatings
Mr. Dianying Chen, Oerlikon Metco (US) Inc; Mr. Aaron M Pegler, Oerlikon Metco AG; Mr. Mitchell R Dorfman, Oerlikon Metco (US) Inc.
9:00 AM
Oxygen Permeability and Its Role in Governing Life of YbDS Environmental Barrier Coatings
Ms. Sonia singh, The University of Ottawa; Prof. Michel Nganbe, The University of Ottawa; Dr. Kuiying Chen, National Research Council Canada
9:15 AM
Formation Dynamics of Ni-Graphite Abradable Coatings
Dr. Juliane Alves, Ph.D., Center for Thermal Spray Research, State University of New York at Stony Brook; Prof. Sanjay Sampath, Center for Thermal Spray Research, State University of New York at Stony Brook
9:30 AM
Contribution in Optimization of Honeycomb Abradable Seals Structure
Mr. Puskar Pathak, MS student, Skolkovo Institute of Science and Technology; Dr. Dmitry Dzhurinskiy, Assistant Professor, Skolkovo Institute of Science and Technology; Mr. Aleksandr Elkin, PhD student, Skolkovo Institute of Science and Technology; Mr. Petr Shornikov, Senior Engineer, Skolkovo Institute of Science and Technology; Mr. Stanislav Dautov, Research Engineer, Skolkovo Institute of Science and Technology; Mr. Valeriy Ivanov, Project Director, Rotec JSC Company
9:45 AM
The influence of plasma composition in the deposition efficiency, thermal conductivity, bond strength and thermal cyclic performance of yttria stabilized zirconia (8YSZ) thermal barrier coatings (TBCs)
Dr. Bruno M. H. Guerreiro, National Research Council of Canada (NRC); Dr. Rogerio S. Lima, National Research Council of Canada (NRC); Dr. Nicholas Curry, Treibacher Industrie AG; Mr. Matthias Leitner, Treibacher Industrie AG; Mr. Karl Körner, Treibacher Industrie AG
See more of: Advanced Coatings for the Aerospace Industry (Joint Symposium with AeroMat)
<< Previous Session | Next Session >>