Cold Spray Metals, Ceramics and Metal Matrix Composite Coatings II-b

Tuesday, May 25, 2021: 10:15 AM-12:30 PM
Dr. Amirhossein Mahdavi, University of Alberta and Prof. Sinan Muftu, Northeastern University
10:15 AM
Properties of Cold Sprayed and Controlled Atmospheric Plasma Sprayed High Entropy Alloy (CoCrFeMnNi) Coatings
Dr. Jacob Mahaffey, Sandia National Laboratories; Dr. Andrew Vackel, Sandia National Laboratories; Dr. Andrew Kustas, Sandia National Laboratories
10:30 AM
Residual Stress Formation During Cold Spraying of Nickel Based Superalloys
Mrs. Deepika Shrestha, North Dakota State University; Prof. Fardad Azarmi, North Dakota State University; Prof. Xiangqing. W Tangpong, North Dakota State University
10:45 AM
Soft Particle Impact Temperature Influence on Interfacial Bonding upon Collision with a Hard Substrate Surface
Ms. Aleksandra Nastic, University of Ottawa; Bertrand Jodoin, University of Ottawa; Dr. Dominique Poirier, National Research Council of Canada; Dr. Jean-Gabriel Legoux, National Research Council of Canada
11:00 AM
Cold gas spraying of solution-hardened 316L grade stainless steel powder
Dr. Thomas Lindner, Chemnitz University of Technology; Dr. Jochen Fiebig, Forschungszentrum Jülich GmbH; Mr. Maximilian Grimm, Chemnitz University of Technology; Mrs. Pia Kutschmann, Chemnitz University of Technology; Mr. Martin Löbel, Chemnitz University of Technology
11:15 AM
Deposition of CerMet coatings by cold gas spray
Dr. Mario Tului, Centro Sviluppo Materiali S.p.A.; Dr. Angelo Luigi Marino, CSM SpA; Dr. Stefano Lionetti, CSM SpA; Dr. Rosanna Pileggi, CSM SpA; Mr. Domenico Costanzo, CSM SpA; Mr. Guido Scarcello, CSM SpA
11:30 AM
Effects of substrate pre-treatment on metal coating fabricated by low pressure cold spray
Dr. Hiroki Saito, Tohoku University; Mr. Hiroaki Ebihara, Tohoku University; Prof. Yuji ICHIKAWA, Tohoku University; Prof. Kazuhiro Ogawa, Tohoku University
11:45 AM
Influence of Secondary Component Hardness when Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers
Mr. Andre C. Liberati, McGill University; Dr. Hanqing Che, McGill University; Dr. Phuong Vo, National Research Council Canada; Prof. Stephen Yue, McGill University
12:00 PM
Metallurgical approach for the development of heat treatment applied to 316L stainless steel cold spray coatings
Mrs. Laury-Hann Brassart, Mines ParisTech, PSL Research University, EDF-Lab Les Renardières; Anne-Françoise Gourgues-Lorenzon, Mines ParisTech, PSL Research University; Jacques Besson, Mines ParisTech, PSL Research University; Francesco Delloro, Mines ParisTech, PSL Research University; David Haboussa, EDF-Lab Saclay; Gilles Rolland, EDF-Lab Les Renardières
12:15 PM
Microstructure and Nanomechanical Properties of Cold Sprayed Tantalum Coatings
Dr. Tanaji Paul, Plasma Forming Lab, Florida International University; Dr. Cheng Zhang, Plasma Forming Lab, Florida International University; Prof. Benjamin Boesl, Plasma Forming Lab, Florida International University; Prof. Arvind Agarwal, Plasma Forming Lab, Florida International University
See more of: Fundamentals/Research & Development
<< Previous Session | Next Session >>