Characterization & Testing Mechanical and Chemical Properties I-b

Thursday, May 27, 2021: 10:15 AM-12:00 PM
Prof. Thomas W. Coyle, Centre for Advanced Coating Technologies (CACT), University of Toronto and Dr. John Koppes, Thermal Spray Technologies
10:15 AM
Effect of Feedstock and Residual Stresses on the Tensile Performance of WC-10Co4Cr Coatings Processed by HVOF
Dr. Juliane Alves, Ph.D., Center for Thermal Spray Research, State University of New York at Stony Brook; Dr. Felipe Caliari, Center for Thermal Spray Research, State University of New York at Stony Brook; Mr. Jonathan Gutleber, Oerlikon Metco (US) Inc.; Prof. Sanjay Sampath, Center for Thermal Spray Research, Stony Brook University
10:30 AM
Investigation on Microstructural Characteristics and Mechanical Properties of Thermally Sprayed Fe-based Composites Reinforced with Different Ceramic Particulates
Prof. Fardad Azarmi, North Dakota State University; Prof. Xiangqing. W Tangpong, North Dakota State University
10:45 AM
Microstructure development of an electroplating coated nickel based SC superalloy in oxidation processes: simulation results
Dr. Kang Yuan, BGRIMM Technology Group; Mr. Zhaoran Zheng, BGRIMM Technology Group
11:00 AM
Mechanical and Fatigue Properties of Tungsten Heavy Alloy Prepared by RF-plasma
Dr. Ondrej Kovarik, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering; Dr. Jan Cizek, Institute of Plasma Physics, Czech Academy of Sciences, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering; Mr. Jakub Klecka, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering, Institute of Plasma Physics, Czech Academy of Sciences; Dr. Jaroslav Cech, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering; Dr. Jiri Capek, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering; Mr. Michal Hajicek, UJP a.s.
11:15 AM
Correlations Between Stress Distributions and Coating Adhesion Strength as Tested by Tensile Adhesion Methods
Ms. Shalaka Vilas Shinde, Center for Thermal Spray Research, Stony Brook University; Prof. Sanjay Sampath, Center for Thermal Spray Research, Stony Brook University
11:30 AM
Hybrid additive manufacturing technology: Induction Heating Cold Spray
Mr. Roberto Ortiz-Fernandez, Cold Spray Research Laboratory, University of Ottawa; Bertrand Jodoin, Cold Spray Research Laboratory, University of Ottawa
11:45 AM
Computational Investigation of the Effect of Microstructure on the Abrasive Wear-Resistance of Nickel- Tungsten Carbide Composite Coatings
Dr. Mohammad Parsazadeh, University of Alberta; Dr. Gary Fisher, InnoTech Alberta; Dr. André G. McDonald, University of Alberta; Dr. James David Hogan, University of Alberta
See more of: Fundamentals/Research & Development
<< Previous Session | Next Session >>