Prof. Christian Moreau

Professor
Concordia University
Department of Mechanical, Industrial and Aerospace Engineering
Montreal, QC
Canada H3G 1M8

Papers:

Evaluation of tribological characteristics of HVOF sprayed (CrMnFeCoNi)Alx high entropy alloy (HEA) coatings
Microstructural and Tribological Behavior of Suspension Plasma Sprayed Mixed Oxide (CuO &Ta2O5) Coatings
Numerical Examination of the Bonding Formation and Coating Build-up in Liquid Cold Spray
High Entropy Alloy (HEA) Bond Coats for Thermal Barrier Coatings (TBCs): A Review
High Entropy Oxides as Promising Materials for Thermal Barrier Topcoats: A Review
Effect of Carbon Fiber Orientation when Cold Spraying Metallic Powders onto Carbon Fiber Reinforced Polymers
In-flight Oxidation of MCrAlY Particles During High Velocity Air-Fuel Spraying: A Numerical Study
Inner diameter High-Velocity Air Fuel (ID-HVAF) spraying of Copper, compared to Cold spray
Effect of Spray Parameters on MCrAlY In-Flight Particle Oxidation and Coating Microstructure Deposited by Internal Diameter High Velocity Air Fuel (ID-HVAF)
Influence of HVAF process parameters on in-flight NiCoCrAlY particle oxidation and corresponding splat characteristics
Numerical modeling of liquid cold spray process
Design and development of a cost-effective methodology for tribological evaluation of thermally sprayed abradable systems
High-temperature tribological evaluation of Co-based lubricious oxides deposited by means of Suspension Plasma Spray
Unravelling the Tribological Characteristics of AlCoCrFeMo High Entropy Alloy Coatings Deposited by Different Thermal Spray Techniques
Microstructural, mechanical, and tribological evaluation of CuAl - based coatings deposited by APS and HVOF
Tribological characteristics of chromium carbide -based coatings with varying binder content deposited by HVOF and HVAF spray processes
Mechanical and tribological characteristics of Cu-based coatings applied using solid-state deposition techniques
Critical Evaluation of Atmospheric Plasma Sprayed Deposition of Cu-based Coatings
Microstructural and crystallization behaviour of as-sprayed and heat-treated Yb2Si2O7 environmental barrier coatings (EBCs) deposited by atmospheric plasma spray (APS): axial and radial injection