Cold/Thermal Spray Additive Manufacturing (Laser-assisted CS)

Monday, May 5, 2025: 1:30 PM-3:10 PM
Room 1 (Vancouver Convention Centre)
Dr. Eric Irissou, National Research Council Canada
1:30 PM
Laser heat treatment for improved cold sprayed copper coating ductility
Dr. Dominique Poirier, National Research Council of Canada; Dr. Bruno Guerreiro, National Research Council of Canada; Prof. Bertrand Jodoin, University of Ottawa; Prof. Arnaud Weck, University of Ottawa; Dr. Jason D. Giallonardo, Nuclear Waste Management Organization (NWMO)
1:50 PM
Parameter Selection in Laser Assisted Cold Spray on Hard Substrates
Mrs. Fernanda Caio, Polycontrols Technologies; Dr. Alexandre Nascimento, Polycontrols Technologies; Dr. Bruno Castilho, Polycontrols Technologies; Dr. Daniel MacDonald, Polycontrols Technologies; Mr. Luc Pouliot, Polycontrols Technologies
2:10 PM
Influence of Pulsed Laser Ablation Parameters on Adhesion of Cold Spray Al6061 Coatings on Extruded Al6061 Substrates
Dr. Jagannadh V.S.N. Sripada, École de technologie supérieure; Mr. Alexis Thibault, Ecole de technologie Superieure; Dr. Jean-François Béland, National Research Council Canada; Dr. Phuong Vo, National Research Council Canada; Dr. Philippe Bocher, École de Technologie Supérieure; Dr. Eric Irissou, National Research Council Canada
2:30 PM
Laser Surface Remelting for Performance Improvement of Shafts Repaired by Cold Spray Additive Manufacturing
Dr. Alexandre Nascimento, Polycontrols Technologies; Dr. Guilherme Koga, Federal University of Sao Carlos; Mr. Luc Pouliot, Polycontrols Technologies; Mrs. Fernanda Caio, Polycontrols Technologies; Dr. Bruno Castilho, Polycontrols Technologies; Dr. Daniel MacDonald, Polycontrols Technologies
2:50 PM
Laser vitrification processing of thermally sprayed enamel coatings
Dr. Filofteia-Laura Toma, Fraunhofer Institute for Materials and Beam Technology, IWS; Dr. Anja Meyer, Fraunhofer Institute for Ceramic Technologies and Systems, IKTS; Mrs. Irina Shakhverdova, Fraunhofer Institute for Materials and Beam Technology, IWS; Imanol Cuevas, Electronic and Opto-Mechanic Engineering EXOM S.L.; Mr. Juan Isaza, Electronic and Opto-Mechanic Engineering EXOM S.L.; Marian Angeles Corres, CIDETEC, Surface Engineering Institute; Jaime Ochoa Saenz de la Fuente, CIDETEC, Surface Engineering Institute; Dr. Annegret Potthoff, Fraunhofer Institute for Ceramic Technologies and Systems, IKTS; Mr. Jens Putzier, Putzier Oberflächentechnik GmbH
See more of: Thermal Spray Applications
<< Previous Session | Next Session >>