Posters

A Phase Field/Finite Element Approach to Model Coupled Phase Transformation and Plasticity in Shape Memory Alloys
Mr. Harshad Paranjape, The Ohio State University; Prof. Peter M. Anderson, The Ohio State University

Al-NiTi Metal Matrix Composites for Next Gen Zero CTE Materials: Modeling and Fabrication
Mr. Adam Hehr, The Ohio State University; Mr. Xiang Chen, The Ohio State University; Prof. Marcelo Dapino, The Ohio State University; Prof. Peter M. Anderson, The Ohio State University

Effect of H-phase Precipitates on Ni-Ti-Hf High Temperature SMA Performance
Mr. Xiang Chen, The Ohio State University; D. R. Coughlin, Los Alamos National Laboratory; Dr. Fan Yang, The Ohio State University; Dr. Ronald D. Noebe, NASA Glenn Research Center; Prof. H.E. Karaca, University of Kentucky; Prof. Michael J. Mills, The Ohio State University; Prof. Peter M. Anderson, The Ohio State University

Influence of Microstructure on the Fatigue Performance of Nitinol: A Computational Analysis
Ms. Fiona Weafer, National University of Ireland, Galway

Fracturing Simulation Of Cruciform Joint Under Biaxial Loads
Dr A. Al-Mukhtar, Technische Universität Bergakademie Freiberg

Transformation and Deformation Mechanisms In High Temperature Shape Memory Alloys With Nanoprecipitates
Mr. Lee Casalena, The Ohio State University; Dr. Fan Yang, The Ohio State University; Mr. Daniel Coughlin, The Ohio State University; Mr. Matthew Bowers, The Ohio State University; Yipeng Gao, The Ohio State University; Mr. Xiang Chen, The Ohio State University; Mr. Harshad Paranjape, The Ohio State University; Prof. Michael J. Mills, The Ohio State University; Prof. Yunzhi Wang, The Ohio State University; Prof. Peter M. Anderson, The Ohio State University; Dr. Ronald D. Noebe, NASA Glenn Research Center; Mr. Glen Bigelow, NASA Glenn Research Center; Darrell J. Gaydosh, NASA Glenn Research Center; Dr. Santo Padula, NASA Glenn Research center

Investigation Of Shape Memory and Supper Elastic Effects Of Ni-Ti Bi-Layers Thin Films
Dr. Maryam Mohri, Karlsruhe Institute of Technology (KIT), INT; Prof. Mahmoud Nili-Ahmadabadi, University of Tehran; Prof. Horst Hahn, Karlsruhe Institute of Technology (KIT), INT; Mohammad Hassan Malekoshoaraie, University of Tehran

Analogies and Differences Between Tensile and Free Recovery (TFR) and The Common Techniques For Superelastic Nitinol Characterization
Mr. Andrea Cadelli, SAES Getters S.p.A; Dr. R. M. Manjeri, SAES Smart Materials; Mr. Frank Sczerzenie, SAES Smart Materials; Dr. Alberto Coda, SAES Getters S.p.A

Further Numerical/Experimental Investigations Of Nitinol Actuator Springs
Prof. Ferdinando Auricchio, University of Pavia; Dr. Giulia Scalet, Università di Bologna; Mr. Marco Urbano, SAES Getters S.p.A

Influence Of Precipitation In 50.3Ni-32.2Ti-17.5Zr (at.%) On Microstructure and Shape Memory Behavior
Ms. Suzanne M. Kornegay, The University of Alabama; Mr. B. Chad Hornbuckle, The University of Alabama; Dr. Ronald D. Noebe, NASA Glenn Research Center; Mr. Glen Bigelow, NASA Glenn Research Center; Dr. Mark L. Weaver, The University of Alabama; Gregory B. Thompson, The University of Alabama

Microstructural Evolution and Transformation Behavior Of An Aged Ti-Ni-Au Shape Memory Alloy
Mr. Todd M. Butler, The University of Alabama; Gregory B. Thompson, The University of Alabama; Dr. Mark L. Weaver, The University of Alabama