Poster Session

Tuesday, May 16, 2017: 5:30 PM-7:00 PM
Sunset Pavilion (Paradise Point Resort )
Investigation of Superelastic NiTi Surface by Mechano-Electrochemical Methods
Dr. Jan Racek, Institute of Physics ASCR; Dr. Petr Sittner, Institute of Physics ASCR; Dr. Ludek Heller, Institute of Physics ASCR; Mr. Chris Bräuner, Admedes Schuessler GmbH; Dr. Markus Wohlschlögel, Admedes Schuessler GmbH
Effect of minor alloying additions and its variation on properties affecting shape memory behaviour of Cu-12Al-4Ni alloy
Mr. Rupa Dasgupta, CSIR-AMPRI; Ashish Kumar Jain, CSIR-AMPRI; Ayub Ansari, CSIR-AMPRI; Shahadat Hussain, CSIR-AMPRI; Abhishek Pandey, CSIR-AMPRI
Effect of heat treatment on redial force of NiTi tube stent
Mr. Koosha Abedi, Cook Medical; Mr. Jan Douglas, Cook Medical; Mr. Allan Hemmingsen, Cook Medical
Characterization of fretting damage in NiTi superelastic wires
Mr. Sergio Raul Soria, CONICET, Centro Atomico Bariloche-CNEA; Dr. Hugo Soul, Instituto Balseiro and Centro Atomico Bariloche; Prof. Alejandro Yawny, Centro Atomico Bariloche
Shape memory alloy-based rings for ultra high vacuum applications in particle accelerators
Mr. Fabrizio Niccoli, European Center for Nuclear Research (CERN); C. Garion, European Center for Nuclear Research (CERN); Dr. Carmine Maletta, University of Calabria; Dr. Emanuele Sgambitterra, University of Calabria; Prof. Franco Furgiuele, University of Calabria; P. Chiggiato, European Center for Nuclear Research (CERN)
Miniaturized Shape Memory (SMA) Bimorph Actuators with Polymer Layers
Mr. Cory R Knick, US Army Research Laboratory; Mr. Gabe L Smith, US Army Research Laboratory; Christopher J. Morris, US Army Research Laboratory
Microstructural and deformation characteristics of a high strength 60NiTi alloy
Dr. Anita Garg, NASA Glenn Research center/ University of Toledo; Dr. Othmane Benafan, NASA Glenn Research Center; Dr. Ronald D Noebe, NASA Glenn Research Center; Dr. H. D. Skorpenske, Oak Ridge National Laboratory; Dr. Ke An, Oak Ridge National Laboratory; Dr. Norbert Schell, Helmholtz-Zentrum
Temperature dependent fracture properties of pseudoelastic SMAs: measurements and modeling
Dr. Carmine Maletta, University of Calabria; Dr. Emanuele Sgambitterra, University of Calabria; Mr. Fabrizio Niccoli, University of Calabria; Prof. Franco Furgiuele, University of Calabria
Microstructural Characterization Of Ni4Ti3 Precipitates In Nickel Titanium Tubes And Modeling Of Precipitate-Matrix Interactions
Mr. Shivram Sridhar, Carnegie Mellon University; Prof. Anthony Rollett, Carnegie Mellon University
Comparison of an Automatic Contacting Extensometer to a Clip-on Extensometer, and a Video Extensometer as a Strain Measurement Technique for Testing Nitinol Wire to ASTM F2516-14
Ms. Elayne Gordonov, Instron
Towards Inferring Superelasticity Parameters from Instrumented Indentation Data
Mr. Francisco Fernando Roberto-Pereira, University of Cambridge; Mr. J Dean, University of Cambridge; Prof. T. W. Clyne, University of Cambridge
See more of: Online Submissions
<< Previous Session | Next Session >>