Novel Shape Memory Alloy Development II

Wednesday, May 8, 2024: 10:30 AM-12:15 PM
Meeting Room II (Hotel Cascais Miragem)
Dr. Othmane Benafan, NASA Glenn Research Center and Prof. João Pedro Oliveira, The Ohio State University
10:30 AM
60071
NbRu: A Refractory Shape Memory Alloy
Mr. Tyler Knapp, Georgia Institute of Technology; Dr. Aaron Stebner, Georgia Institute of Technology
10:45 AM
60042
Revisiting ultra-high temperature shape memory behavior in NiHf-X and RuNb-X alloys
Dr. Othmane Benafan, NASA Glenn Research Center; Mr. Glen S. Bigelow, NASA Glenn Research Center; Dr. Anita garg, University of Toledo/NASA Glenn Research Center; Dr. John Lawson, NASA Ames Research Center; Dr. Zhigang Wu, NASA Ames Research Center
11:00 AM
59987
Process-performance tuning of a NiTiPt alloy for medical and elastocaloric applications
Dr. Jeremy E. Schaffer, Fort Wayne Metals Research Products, LLC; Dr. Lukas Kaderavek, Nuclear Physics Institute of the CAS; Dr. S. Cai, Fort Wayne Metals Research Products, LLC
11:15 AM
60000
Challenges in Alloying of NiTi - New Approaches for Low-Hysteresis and High Temperature SMAs
Dr. Jannis Lemke, CNR-ICMATE, BioActiveMetals S.r.l.; Dr. Alberto Coda, CNR-ICMATE, BioActiveMetals S.r.l.; Dr. Jacopo Fiocchi, National Research Council of Italy - CNR ICMATE; Dr. Carlo Alberto Biffi, National Research Council of Italy - CNR ICMATE; Dr. Ausonio Tuissi, National Research Council of Italy - CNR ICMATE
11:30 AM
60153
Unlocking Enhanced Thermal Management with High-Performance Shape Memory Alloys
Dr. Alexander Demblon, Texas A&M University; Dr. Kadri C. Atli, Texas A&M University; Dr. William Trehern, Texas A&M University; Mr. Nathan Hite, Texas A&M University; Dr. Ibrahim Karaman, Texas A&M University
11:45 AM
60144
Alloy Design for Additive Manufacturing of Shape Memory Alloys
Mr. Mohammad Pourshams, Department of Mechanical Engineering, University of Toledo; Ms. Hediyeh Dabbaghi, Department of Mechanical Engineering, University of Toledo; Dr. Behrang Poorganji, Department of Mechanical Engineering, University of Toledo; Prof. Mohammad Elahinia, Department of Mechanical Engineering, University of Toledo
12:00 PM
61192
Shape Memory Effect by FCC-HCP Transformation in High-Entropy Alloys
Dr. Koichi Tsuchiya, National Instute for Materials Sceince
See more of: Technical Program
<< Previous Session | Next Session >>