Additive5
Processes & Properties

Wednesday, June 18, 2014: 8:00 AM-12:00 PM
Tallahassee 2 (Gaylord Palms Resort )
Session Chair:
Dr. James D. Cotton
8:00 AM
Additive5.1
Influence of Build Directionality on the Fatigue Properties of Electron Beam Melting (EBM Ti-6Al-4V)
S. A. Martinez, UTC Pratt & Whitney; Mr. Eli Ross, UTC Pratt & Whitney; V. Seetharaman, UTC Pratt & Whitney; C. Oswald, UTC Pratt & Whitney
8:30 AM
Additive5.2
Hybrid Method to Achieve Forged Microstructures and Properties in Laser Deposited Components
Prof. Joseph Newkirk, Missouri University of Science and Technology; Prof. Frank Liou, Missouri University of Science and Technology; N/A Romy Francis, Missouri University of Science and Technology; N/A Jiye Wang, Missouri University of Science and Technology
9:00 AM
Additive5.3
Addressing Stress Mitigation in Electron Beam Processing
Mr. Mike Nunn, TWI Limited; Dr. Nick Bagshaw, TWI Limited; Dr. Tim Mitchell, TWI Limited
9:30 AM
Additive5.4
In Situ Synthesis and Characterization of Zr-Based Amorphous Composite By Laser Direct Deposition
Mr. Xiaoyang Ye, Purdue University; Mr. Heehun Bae, Purdue University; Prof. Yung Shin, Purdue University; Prof. Lia Stanciu, Purdue University
10:00 AM
Break
10:30 AM
Additive5.5
CANCELLED - 3D Printing of Bronze and Copper Metal ‘Clays'
Dr. Bill Struve, Metal Adventures Inc.
11:00 AM
Additive5.6
EBM Development on Inconel 718 for Use in Aerospace Components
Dr. Francisco Medina, Arcam; Dr. Ryan Dehoff, Oak Ridge National Lab; Will Sames, Texas A&M University; Frederik A. List III, Oak Ridge National Lab; Dr. Ulf Ackelid, Arcam
11:30 AM
Additive5.7
Microstructure Evolution, Properties, and Damage Mechanisms in Ti-6Al-4V Manufactured By Laser Engineered Net Shaping
Ms. Yuwei Zhai, Worcester Polytechnic Institute; Ms. Hayley Sandgren, Worcester Polytechnic Institute; Prof. Diana Lados, Worcester Polytechnic Institute
See more of: Additive Manufacturing
<< Previous Session | Next Session >>