Suspension/Solution and Plasma-Spray PVD TBCs - Novel TBC Materials

Monday, May 11, 2015: 8:00 AM-12:10 PM
Room 102A (Long Beach Convention and Entertainment Center)
Session Chairs:
Mr. Brian Hazel and Dr. Rogerio S. Lima
8:00 AM
Columnar Suspension Plasma Spray Thermal Barrier Coatings: Influence of Suspension Properties and Bond Coat Preparation
Dr. Nicholas Curry, Treibacher Industrie AG; Dr. Kent VanEvery, Progressive Surface; Mr. Johann Susnjar, Treibacher Industrie AG; Mr. Stefan Björklund, University West; Todd Snyder, Progressive Surface
8:20 AM
Solution Precursor Plasma Spray of Yttrium Aluminum Garnet Thermal Barrier Coatings
Dr. Eric Jordan, The University of Connecticut; Dr. Maurice Gell, The University of Connecticut; Dr. jiwen wang, Hifunda LLC; Chen Jiang, The University of Connecticut; Mr. Jeffrey roth, The University of Connecticut; Mr. Rishi kumar, Universtiy of Connecticut
8:40 AM
Process-Structure-Property Relationships in Advanced Thermal Barrier Coatings (TBC) Fabricated via Plasma Spray – Physical Vapor Deposition (PS-PVD)
Mr. Michael P. Schmitt, The Pennsylvania State University; Dr. Bryan J. Harder, NASA Glenn Research Center; Dr. Douglas E. Wolfe, The Pennsylvania State University
9:00 AM
Thermal barrier coatings performed by suspension plasma spraying: development and characterization
Mr. Benjamin BERNARD, Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (LEMTA/CNRS); Dr. Luc BIANCHI, CEA DAM; Mr. André MALIE, Safran Snecma; Dr. Vincent SCHICK, Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (LEMTA/CNRS); Dr. Benjamin REMY, Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (LEMTA/CNRS)
9:20 AM
Thermal transport properties of columnar structured zirconia coatings deposited by suspension plasma spraying method
Prof. Lech Pawlowski, University of Limoges; Mr. Pawel Sokolowski, University of Limoges; Dr. Dagmar Dietrich, Technical University of Chemnitz; Prof. Thomas Lampke, Chemnitz University of Technology; Dr. Leszek Latka, University of Limoges; Mr. David Jech, Brno University of Technology
9:40 AM
This is in situ synthesis of α-alumina layer against CMAS (CaO-MgO-Al2O3-SiO2) corrosion in thermal barrier coatings prepared by PS-PVD case
Prof. Ke-Song Zhou, Guangdong General Research Institute of Industrial Technology (Guangzhou Research Institute of Non-ferrous Metals); Mr. Xiao-Feng Zhang, Guangdong General Research Institute of Industrial Technology (Guangzhou Research Institute of Non-ferrous Metals)
10:00 AM
Break
10:30 AM
Evaluating Conditions for Manufacturing Suspension Plasma TBCs
Dr. Kent VanEvery, Progressive Surface
10:50 AM
Axial Suspension Plasma Sprayed Thermal Barrier Coatings
Dr. Zhaolin Tang, Northwest Mettech Corp.; G Masindo, Northwest Mettech Corp.; D Barentzen, Northwest Mettech Corp.; Z Celler, Northwest Mettech Corp.
11:10 AM
Internal Stresses in Ytterbium Disilicate Multilayer Environmental Barrier Coatings With Calcium-Magnesium-Aluminosilicate Exposure
Dr. Fabian Stolzenburg, Northwestern University; Dr. Peter Kenesei, Argonne National Laboratory; Dr. Jonathan Almer, Argonne National Laboratory; Dr. Kang Lee, Rolls-Royce Corporation; Prof. Katherine Faber, Northwestern University
11:30 AM
PREPARATION AND CHARACTERIZATION OF LANTHANUM ZIRCONATE BY ATMOSPHERIC PLASMA SPRAY COATINGS
Mr. Sivakumar Sankaran, Bharathiar university; Mr. Praveen Kandasamy, Bharathiar university; Dr. Gurusamy Shanmugavelayutham, Bharathiar university
11:50 AM
Synthesis Of Rare Earth Aluminates From Pseudoboehmite And Oxides
Mr. wilson Hernández, UMSNH
See more of: Advanced Coatings for the Aerospace Industry (JOINT SYMPOSIUM with ITSC)
<< Previous Session | Next Session >>