Additive Manufacturing IV

Tuesday, May 24, 2016: 1:00 PM-5:30 PM
404 (Meydenbauer Center)
Session Chair:  Dr. Frank Medina, EWI, Columbus, OH
1:00 PM
Microstructural Refinement of Additive Manufactured Ti-6Al-4V By Thermohydrogen Processing
Dr. Hao Zhang, Boeing; Mr. Ryan Quarberg, Boeing
1:30 PM
Application of High-Strength, High-Ductility Titanium Alloys for Additive Manufacturing (AM) Processing
Mr. Clay Houser, QuesTek Innovations, LLC; Brian T. Rosenberger, Lockheed Martin Aeronautics Company
2:00 PM
Microstructure and Properties of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo after Electron Beam Melting Additive Manufacture
Dr. John Porter, UES Inc.; Mr. Mike Velez, UES Inc.AFRL/RXCM; Dr. Patrick Martin, UES Inc.; Mr. John Wooten, CalRAM Inc
2:30 PM
Evaluation of Free Form Laser Additive Ti 6Al-4V Forms Produced from PREP Powder
Mr. Tim Barstow, TIMET - Henderson Technical Laboratory; Nick Wald, RPM Innovations
3:00 PM
Break
3:30 PM
Additive Friction Stir for Additive Manufacturing
Ms. Nanci Hardwick, Aeroprobe Corporation
4:00 PM
Preliminary study on inkjet-based high-speed sintering 3D printing for a polymeric material
Dr. Dave Kim, Washington State University Vancouver; Dr. Hua Tan, Washington State University Vancouver
4:30 PM
Electrochemical Surface Finishing of Additively Manufactured Parts
Dr. Timothy Hall, Faraday Technology, Inc.; Mr. Stephen Snyder, Faraday Technology, Inc.; Dr. Maria Inman, Faraday Technology, Inc.; Dr. EJ Taylor, Faraday Technology, Inc.
5:00 PM
Metallic Materials by Additive Manufacturing for Surface Cooling of Combustion Chambers
Ms. Océane Lambert, ONERA; Cécile Davoine, ONERA; Daniel Gaffié, ONERA; Rémy Dendievel, Grenoble University & CNRS, SIMaP
See more of: Technical Program
<< Previous Session | Next Session >>