Modeling & Simulation

Tuesday, May 12, 2015: 8:00 AM-11:50 AM
Room 104A (Long Beach Convention and Entertainment Center)
Session Chair:
Prof. Ali Dolatabadi
8:00 AM
Modeling of the APS Process: from the Arc to the Coating Effective Properties
Dr. Rodolphe BOLOT, University of Technology of Belfort-Montbéliard; Ms. Emilie Aubignat, IRTES-LERMPS/UTBM; Ms. Marie-Pierre PLANCHE, IRTES-LERMPS, UTBM; Dr. Alain Allimant, Saint-Gobain C.R.E.E.; Mr. Dominique Billières, Saint-Gobain Coating Solutions; Prof. Ghislain montavon, University of Technology of Belfort-Montbéliard
8:40 AM
Phase field modeling of particle solidification in thermal spray
Mr. Tatu Pinomaa, VTT Technical Research Centre of Finland; Nana Ofori-Opoku, McGill University; Mr. Anssi Laukkanen, VTT Technical Research Centre of Finland; Prof. Nikolas Provatas, McGill University
9:00 AM
Experimental Investigation and Finite Element Simulation of Residual Stress Development in Thermally Sprayed Coatings
Mr. Mohamed Elhoriny, University of Stuttgart; Mr. Martin Wenzelburger, University of Stuttgart; Dr. Andreas Killinger, University of Stuttgart; Prof. Rainer Gadow, University of Stuttgart
9:20 AM
Parametric study of plasma torch operation using a MHD model coupling the arc and electrodes
Dr. Maher Alaya, University of Limoges; Dr. Christophe Chazelas, University of Limoges; Prof. Armelle Vardelle, University of Limoges
9:40 AM
Robot Kinematic Analysis For Torch Setup Optimization In Thermal Spraying
Mr. Chaoyue CHEN, University of Technology of Belfort-Montbéliard; Dr. Sihao DENG, University of Technology of Belfort-Montbéliard; Prof. Hanlin LIAO, University of Technology Belfort - Montbéliard; Prof. Ghislain montavon, University of Technology of Belfort-Montbéliard
10:00 AM
Break
10:30 AM
Investigation of Flow Parameters in Wire Arc Thermal Spraying using CFD Simulation
Mr. Amirsaman Farrokhpanah, Centre for Advanced Coating Technologies (CACT), University of Toronto; Mr. Julien Naffrechoux, Polytech Nantes, Graduate School of Engineering; Dr. Larry Pershin, Centre for Advanced Coating Technologies (CACT), University of Toronto; Prof. Javad Mostaghimi, Centre for Advanced Coating Technologies (CACT), University of Toronto
10:50 AM
Taguchi Design And Analysis Of 3D-Computer Fluid Dynamic (CFD) Experiments (TDACE) For The Optimization Of Air-Cap Configuration In Arc Spraying
Mr. Mohamed Abdulgader, Institute of Materials Engineering, Technische Universität Dortmund; Prof. Wolfgang Tillmann, Technical University of Dortmund; Mr. Nassir Anjami, Institute of Materials Engineering, Technische Universität Dortmund; Mr. Diego Bezerra, Institute of Materials Engineering, Technische Universität Dortmund
See more of: Fundamentals/R&D
<< Previous Session | Next Session >>