Diagnostics & Characterization

Thursday, May 14, 2015: 8:00 AM-12:10 PM
Room 102B (Long Beach Convention and Entertainment Center)
Session Chair:
Prof. Christian Moreau
8:00 AM
"Detection and avoiding of unmelted wire pieces during wire arc spraying"
Mr. Stefan Eichler, Universitaet der Bundeswehr Muenchen; Prof. Werner Mayr, University of Applied Sciences Munich; Mr. Stefan Kirner, Universitaet der Bundeswehr Muenchen; Dr. Jochen Zierhut, Zierhut Messtechnik GmbH; Dr. Stephan Zimmermann, Universitaet der Bundeswehr Muenchen; Prof. Jochen Schein, Universitaet der Bundeswehr Muenchen; Mr. Alexander Atzberger, Universitaet der Bundeswehr Muenchen
8:20 AM
Offline Acoustic Plasma Spray Nozzle Wear State and Characteristic Identification
Mr. Taylor K. Blair, Virginia Polytechnic Institute and State University; Dr. Gary R. Pickrell, Virginia Polytechnic Institute and State University; Mr. Michael Cybulsky, Rolls-Royce Corporation; Mr. Raymond Sinatra, Rolls Royce Coporation; Dr. Romesh Batra, VirginiaTech
8:40 AM
Output signal characteristics of thyristor- and transistor-controlled power supplies and its influence on the electric discharge in a plasma spray process
Hartmut Koschnitzke, Oerlikon Metco AG (Switzerland); Dr. Majid Nabavi, Oerlikon Metco AG Wohlen; Mr. Uwe Jagow, Oerlikon Metco; Dr. Alexander Schwenk, Sulzer Metco AG (Switzerland)
9:00 AM
Spatial Mapping of Plasma Sprayed Coating Thickness Using X-Ray Fluorescence and Laser Triangulation
Dr. Kendall J. Hollis, Los Alamos National Laboratory; Dr. Deborah A. Summa, Los Alamos National Laboratory; Ms. Velma M. Lopez, Los Alamos National Laboratory; Dr. George J. Havrilla, Los Alamos National Laboratory
9:20 AM
Eddy Current Measurement Technique For Bi-Layer Thermal Barrier Systems
Mr. Gregory M Smith, Center for Thermal Spray Research, Stony Brook University; Nicholas Erb, GKN Aerospace Engine Systems; Mats-Olov Hansson, GKN Aerospace Engine Systems; Jimmy Johansson, GKN Aerospace Engine Systems
9:40 AM
Effect Of Spraying Parameters On The Strain Of Plasma Sprayed YSZ Coatings Measured By The Digital Image Correlation Method During The Tensile Test
Mr. Lele Ruan, East China University of Science and Technology; Mr. Zexin Yu, East China University of Science and Technology; Prof. Weize Wang, East China University of Science and Technology; Mr. Yufan Chen, East China University of Science and Technology
10:00 AM
Break
10:30 AM
On the Relationship Of Tungsten Composition To Coating Properties
Dr. Jose Colmenares, Oerlikon Metco; Mr. Ronald Molz, Oerlikon Metco; Dr. Ramachandran Seshadri, Center for Thermal Spray Research, Stony Brook University; Mr. David Hawley, Oerlikon Metco
10:50 AM
Transplantation Of Thermal Sprayed Coatings
Mr. Patrick Knödler, Leibniz Universität Hannover; Mr. Achim Peuker, TU Dortmund; Mr. Dennis Freiburg, TU Dortmund; Mr. Maik Otten, Leibniz Universität Hannover; Dr. K. Möhwald, Leibniz Universität Hannover; Prof. Dirk Biermann, TU Dortmund; Prof. Hans J. Maier, Leibniz Universität Hannover
11:10 AM
Influence of spray parameters on the microstructure and properties of high velocity oxy-fuel sprayed multimodal WC-17Co coatings
Prof. Gang-Chang Ji, Jiujiang University; Dr. Xiao Chen, Jiujiang University; Dr. Hong-Tao Wang, jiujiang university; Xiao-Bo Bai, Jiujiang University
See more of: Fundamentals/R&D
<< Previous Session | Next Session >>