Protective and Tribological Coatings I

Wednesday, May 9, 2018: 8:00 AM-10:50 AM
Naples 3 (Gaylord Palms Resort )
Dr. Jean-Michel Lamarre, National Research Council Canada and Prof. Jocelyn Veilleux, Université de Sherbrooke
8:00 AM
Wear and corrosion behaviour of thermally sprayed FeCrMnBC coatings for pump parts
Prof. Matthias Oechsner, TU Darmstadt, Center for Structural Materials; Mr. Marius Siebers, TU Darmstadt, Center for Structural Materials; Dr. Jörg Ellermeier, TU Darmstadt, Center for Structural Materials; Dr. Georg Andersohn, TU Darmstadt, Center for Structural Materials; Prof. Kirsten Bobzin, Surface Engineering Institute, RWTH Aachen University; Dr. Lidong Zhao, Surface Engineering Institute, RWTH Aachen University; Mr. Tim Königstein, Surface Engineering Institute, RWTH Aachen University; Dr. Mehmet Öte, Surface Engineering Institute, RWTH Aachen University
8:20 AM
High Speed Slurry-Pot Erosion Wear Testing of HVOF and HVAF Sprayed Hardmetal Coatings
Mr. Ville Matikainen, Tampere University of Technology; Silvia Rubio Peregrina, Tampere University of Technology; Niko Ojala, Tampere University of Technology; Dr. Heli Koivuluoto, Tampere University of Technology; Mr. Jan Schubert, Research and testing Institute in Pilsen Ltd.; Dr. Šárka Houdková, Research and testing Institute in Pilsen Ltd.; Prof. Petri Vuoristo, Tampere University of Technology
8:40 AM
Deposition of environmentally friendly SiC based cermets coatings by thermal spray techniques
Ms. Maryam Bazyaran, Thermal Spray Center, Universitat de Barcelona; Dr. H. Canales, National Aerospace University; Dr. I. G. Cano, Thermal Spray Centre (CPT) - Universitat de Barcelona; Dr. Sergi Dosta, Thermal Spray Center, Universitat de Barcelona
9:00 AM
Abrasive wear of carbide weld overlays for ground engaging tools
Dr. Senad Dizdar, Höganäs AB; Mr. Martin Lohrman, North American Höganäs
9:20 AM
Macroline®: new solution to improve abrasive wear resistance
Mr. Oliver Lanz, H.C. Starck STC GmbH; Dr. Andrea Scrivani, H.C. Starck STC GmbH
10:10 AM
Investigation into the Suitability of HVOF Nickel Based Cermets in Marine Hydraulic Service Subject to Biofouling
Mr. Hugo Howse, United Surface Technology; Dr. Andrew S.M. Ang, Swinburne University of Technology; Dr. Scott Wade, Swinburne University of Technology; Mr. Matthew Leigh, MacTaggart Scott Australia; Dr. Richard Piola, Defence Science & Technology Group; Prof. Christopher C. Berndt, Swinburne University of Technology