New Coating Materials Development II

Tuesday, May 28, 2019: 13:30-16:50
Annex Hall/F204 (Pacifico Yokohama)
Dr. Tanvir Hussain, University of Nottingham and Mr. Komal Laul, Delta Air Lines
13:30
HVOF spraying of a new generation of high-energy ball milled TiC-FeCr powders as alternative to conventional cermets and hard chromium
Dr. Vicente Albaladejo, Thermal Spray Centre (CPT) - Universitat de Barcelona; Dr. J. Sánchez, Thermal Spray Centre (CPT) - Universitat de Barcelona; Dr. Maria Sarret, Thermal Spray Centre (CPT) - Universitat de Barcelona; Dr. Sergi Dosta, Thermal Spray Centre (CPT) - Universitat de Barcelona; Dr. I. G. Cano, Thermal Spray Centre (CPT) - Universitat de Barcelona
13:50
Fracture and Deformation Behavior of Fine Ceramic Particles in In Situ Compression Test for Understanding of Aerosol Deposition Process
Mr. Shota Kuroyanagi, National Institute of Advanced Industrial Science and Technology (AIST); Prof. Atsushi Yumoto, Shibaura Institute of Technology; Dr. Jun Akedo, National Institute of Advanced Industrial Science and Technology (AIST); Dr. Kentaro Shinoda, National Institute of Advanced Industrial Science and Technology (AIST)
14:10
Room-Temperature Deposition Mechanism, Wear and Oxidation Properties of Vacuum Kinetic Sprayed Silicon Carbide on Metallic Substrate
Dr. Kyu-Sik KIM, Inha University; Dr. Gi-Su Ham, Inha University; Prof. Kee-Ahn Lee, Ph.D, Inha University
14:30
Study on Co3O4 and NiCo2O4 films deposited through solution precursor thermal spray routes for supercapacitor application
Mr. Zexin YU, ICB-LERMPS UMR 6303, CNRS, UTBM, Université de Bourgogne Franche-Comté; Dr. Yangzhou MA, School of Materials Science and Engineering, Anhui University of Technology; Mrs. Meimei LIU, ICB-LERMPS UMR 6303, CNRS, UTBM, Université de Bourgogne Franche-Comté; Mr. Xuanning HUANG, School of Materials Science and Engineering, Anhui University of Technology; Dr. Chen Song, Guangdong Institute of New Materials, National Engineering Laboratory for Modern Materials Surface Engineering Technology; Dr. Michel MOLIERE, ICB-LERMPS UMR 6303, CNRS, UTBM, Université de Bourgogne Franche-Comté; Prof. Guangsheng SONG, School of Materials Science and Engineering, Anhui University of Technology; Prof. Hanlin LIAO, ICB-LERMPS UMR 6303, CNRS, UTBM, Université de Bourgogne Franche-Comté
14:50
Afternoon Refreshment Break
15:30
Suspension High Velocity Oxy Fuel (SHVOF) spray of graphene nanoplatelets for low-friction wear protective films
Dr. Federico Venturi, University of Nottingham; Dr. Tanvir Hussain, University of Nottingham
15:50
Utilizing Computational Materials Design in the Development of Iron-Based Alloys for Hardfacing
Dr. Robert Frykholm, Höganäs AB; Ms. Barbara Maroli, Höganäs AB; Dr. Karin Frisk, Höganäs AB; Dr. Hans Hallén, Höganäs AB
16:10
Bioinspired Mechanically Robust Metal-based Water Repellent Surface enabled by Scalably Constructing a Flexible Coral-Reef Like Cu based Architecture
Dr. Xiao-Tao Luo, Xi'an Jiaotong University; Prof. Chang-Jiu Li, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University
16:30
Development of thermo-erosion-resistant polymer protective coating for the protection of polymer composite material (PCM) for aircraft
Ms. Renata Gavrilova, OOO Technological system for protection coatings; Dr. Lev Baldaev, OOO Technological system for protection coatings; Dr. Sergey Baldaev, Technological systems for protective coatings
See more of: Research & Development
<< Previous Session | Next Session >>