Thermally Sprayed Coating-Based Heating Systems for Boundary Layer Transition Detection – An Experimental Approach

Wednesday, May 26, 2021: 11:35 AM
Mr. Manuel Machulla , Fraunhofer-Institute for Material and Beam Technology IWS, Dresden, Germany
S. Taghian Dehaghani , University of Alberta, Edmonton, AB, Canada
P. Claußnitzer , Technische Universität Dresden, Dresden, Germany, Fraunhofer-Institute for Material and Beam Technology IWS, Dresden, Germany
Mr. Stefan Scheitz , Fraunhofer-Institute for Material and Beam Technology IWS, Dresden, Germany
Prof. André McDonald , University of Alberta, Edmonton, AB, Canada
Prof. Christoph Leyens , Fraunhofer-Institute for Material and Beam Technology IWS, Dresden, Germany, Technische Universität Dresden, Dresden, Germany
Boundary layers on surfaces will change from laminar to turbulent flow after a critical length. Due to the differing heat transfer coefficients of laminar and turbulent flow, the point of transition can be detected by heating the surface and measuring the surface temperature by thermographic imaging. Locating the transition point is cru-cial for the aerodynamic optimization of components in many industries such as aerospace. In this study, fiber rein-forced polymer composites (FRPCs) were chosen as the substrates for the experiments. Experiments with the flame spray (FS)-process and NiCrAlY-coatings on CFRP surfaces were conducted. Multilayered coatings consist-ing of an aluminum bond coat, a layer of alumina as electrical insulation, and a heating layer of titania were fabri-cated by using atmospheric plasma spraying (APS). Free-flight tests were conducted with a functionalized winglet in order to test the ability of thermally-sprayed coating heating elements to detect the location of transition of the flow regime. The results showed that these heating elements can be used to heat a surface uniformly, with suffi-cient surface radiation losses for thermographic imaging. It was observed that a sudden change in surface temper-ature occurs at the point of transition, separation and reattachment. The results suggested that thermography of thermally sprayed heating layers on complex geometries such as winglets may be used in the design process to examine their aerodynamic properties during free flight conditions.