Oerlikon Metco Young Professionals Session

Wednesday, May 26, 2021: 11:00 AM-12:00 PM
Prof. Alfredo Valarezo, Universidad San Francisco de Quito and Dr. Rogerio S. Lima, National Research Council of Canada (NRC)
11:00 AM
Influence of Spray Parameters on the quality of low-pressure Cold Sprayed WC-Ni Coatings
Ms. Wania Jibran, E.I.T., University of Alberta; Prof. André McDonald, University of Alberta; Dr. James David Hogan, University of Alberta
11:05 AM
Thermal Spraying for Offshore Wind Turbines – Keeping Corrosion and Friction at Bay
Prof. Kirsten Bobzin, Surface Engineering Institute, RWTH Aachen University; Mr. Wolfgang Wietheger, Surface Engineering Institute, RWTH Aachen University; Ms. Elisa Burbaum, Surface Engineering Institute, RWTH Aachen University
11:10 AM
Influence of Secondary Component Hardness when Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers
Mr. Andre C. Liberati, McGill University; Dr. Hanqing Che, McGill University; Dr. Phuong Vo, National Research Council Canada; Prof. Stephen Yue, McGill University
11:15 AM
Erosion and abrasion wear resistance of Laser Cladding AISI 431 Stainless Steel
Mr. Andre Hatem, "Surface Engineering for Advanced Materials” - SEAM, University of South Australia; Dr. Christiane Schulz, "Surface Engineering for Advanced Materials” - SEAM, University of South Australia; Dr. Thomas Schlaefer, LaserBond Ltd; Mr. Yoong Aun Lai, Future Industries Institute, University of South Australia; Dr. Colin Hall, "Surface Engineering for Advanced Materials” - SEAM, University of South Australia
11:20 AM
Thermal Barrier Coatings for Diesel Engines - Past, Present, and Future
Mr. John Saputo, Center for Thermal Spray Research; Mr. Carl Schmidt, Center for Thermal Spray Research; Prof. Sanjay Sampath, Center for Thermal Spray Research, Stony Brook University
11:25 AM
Microstructural and mechanical properties of cold sprayed coatings with an emphasis on Ti-6Al-4V
Mr. Samuel Hugo LETT, CEA-DAM Le Ripault, Institut P'; Dr. Aurélie Quet, CEA-DAM Le Ripault; Dr. Erick Meillot, CEA-DAM Le Ripault; Dr. Samuel Hemery, Institut P'; Dr. Jonathan cormier, Institut P'; Dr. Patrick VILLECHAISE, Laboratoire de Mécanique et de Physique des Matériaux, ENSMA
11:30 AM
Finely-structured titania (TiO2) coatings by solution precursor plasma spraying from various TiO2 liquid feedstocks
Ms. KEY T. SIMFROSO, PhD Student, Mindanao State University-Iligan Institute of Technology
11:35 AM
Thermally Sprayed Coating-Based Heating Systems for Boundary Layer Transition Detection – An Experimental Approach
Mr. Manuel Machulla, Fraunhofer-Institute for Material and Beam Technology IWS; S. Taghian Dehaghani, University of Alberta; P. Claußnitzer, Technische Universität Dresden, Fraunhofer-Institute for Material and Beam Technology IWS; Mr. Stefan Scheitz, Fraunhofer-Institute for Material and Beam Technology IWS; Prof. André McDonald, University of Alberta; Prof. Christoph Leyens, Fraunhofer-Institute for Material and Beam Technology IWS, Technische Universität Dresden
11:40 AM
The potential for thermal barrier coatings in internal combustion engines
Mr. Wellington Uczak de Goes, University West; Prof. Nicolaie Markocsan, University West; Dr. Mohit Gupta, University West
11:45 AM
Impact of TiO2 additives on the microstructure and properties of plasma sprayed (Al,Cr)2O3 coatings
Mr. Maximilian Grimm, Chemnitz University of Technology; Dr. Lutz-Michael Berger, Fraunhofer IKTS; Dr. Susan Conze, Fraunhofer IKTS; Dr. Rico Drehmann, Chemnitz University of Technology; Prof. Thomas Lampke, Chemnitz University of Technology
See more of: Young Professionals Session
<< Previous Session | Next Session >>