Automotive, Rail, Heavy and Marine Industries
Thursday, May 27, 2021: 8:00 AM-9:15 AM
Dr. Jose Colmenares-Angulo, Berkshire Community College and Dr. Luc Leblanc, Cummins Inc.
8:15 AM
Development of metal-ceramic-lubricant composite coatings obtained by Cold Spray for tribological applications in the automotive industry
Ms. Glwadys Garcin, MINES ParisTech, PSL Research University, MAT - Centre des Matériaux, CNRS UMR 7633, Renault Technocentre;
Francesco Delloro, MINES ParisTech, PSL Research University, MAT - Centre des Matériaux, CNRS UMR 7633;
Dr. Michel Jeandin, MINES ParisTech, PSL Research University, MAT - Centre des Matériaux, CNRS UMR 7633;
Mr. Geoffroy Rivaud, Science des Procédés Céramiques et de Traitements de Surface;
Dr. Alain Denoirjean, Institut de Recherche sur les céramiques;
Dr. Vincent Fridrici, LTDS, Laboratoire de tribologie et dynamique des systèmes;
Mr. Christian Grente, Renault Technocentre;
Mr. Eric Bidault, Renault Technocentre;
Mr. Marc Jousset, Renault Technocentre;
Mr. Stéphane Boutet, Renault Technocentre;
Mrs. Elodie Bonay, Renault Technocentre;
Mr. Jean-François Hochepied, MINES ParisTech, PSL Research University, MAT - Centre des Matériaux, CNRS UMR 7633;
Mr. Jean-Christophe Abry, LTDS, Laboratoire de tribologie et dynamique des systèmes;
Mr. Gaëtan Bouvard, LTDS, Laboratoire de tribologie et dynamique des systèmes;
Mr. Thomas Malhomme, LTDS, Laboratoire de tribologie et dynamique des systèmes
8:30 AM
Fabrication of cavitation erosion resistant bronze coatings by thermal and kinetic spraying for maritime applications
Mr. Michél Hauer, Fraunhofer Institute for Large Structures in Production Engineering IGP;
Dr. Frank Gärtner, Helmut Schmidt University, University of the Federal Armed Forces Hamburg;
Dr. Sebastian Krebs, Helmut Schmidt University, University of the Federal Armed Forces Hamburg;
Prof. Thomas Klassen, Helmut Schmidt University, University of the Federal Armed Forces Hamburg;
Dr. Makoto Watanabe, National Institute for Materials Science;
Dr. Seiji Kuroda, National Institute for Materials Science;
Mr. Werner Krömmer, Linde Gas Division, Linde AG;
Prof. Knuth Michael Henkel, University of Rostock, Chair of Joining Technology
8:45 AM
Low Temperature Soldering of Laser Structured and Metal Coated Fiber Reinforced Plas-tics
Mr. Kevin Gustke, Chemnitz University of Technology;
Mrs. Jana Gebauer, Fraunhofer Institute for Material and Beam Technology IWS;
Mr. David Kupke, Chemnitz University of Technology;
Dr. Udo Klotzbach, Fraunhofer Institute for Material and Beam Technology IWS;
Prof. Andrés Fabián Lasagni, Technische Universität Dresden;
Dr. Rico Drehmann, Chemnitz University of Technology;
Prof. Thomas Lampke, Chemnitz University of Technology