Wear and Corrosion Protection Applications for: Manufacturing

Monday, May 5, 2025: 3:30 PM-5:10 PM

Room 2 (Vancouver Convention Centre)

Prof. Christian Moreau, Concordia University and Sylvain Badie, OBZ Innovation GmbH

3:30 PM

Considerations for Fatigue Abatement of 4340 AISI in Inner-Diameter HVOF spraying of WC-Co-Cr Coatings
Dr. Jorg Oberste Berghaus, National Research Council Canada; Dr. Simon Baril-Gosselin, National Research Council Canada; Prof. Phillippe Bocher, École de Technologie Supérieure (ÉTS)

3:50 PM

Improving the Adhesion of Cold Sprayed WC-Co-Ni Composite Coatings through the Development of a Bond Coat
Dr. Bruno Castilho, Polycontrols Technologies; Dr. Alexandre Nascimento, Polycontrols Technologies; Dr. Daniel MacDonald, Polycontrols Technologies; Mrs. Fernanda Caio, Polycontrols Technologies; Mr. Luc Pouliot, Polycontrols Technologies

4:10 PM

Optimization of Cr₃C₂-NiCr Coatings Using ID-HVOF: A Statistical Approach to Key Process Parameters
Mr. Mark Dennis Kensy, TU Dortmund University; Dr. Ingor Baumann, TU Dortmund University; Mr. Jonas Frederik Zajaczkowski, TU Dortmund University; Mr. Leif Hagen, TU Dortmund University; Prof. Wolfgang Tillmann, TU Dortmund University

4:30 PM

Behavior of Cr3C2-containing Hardmetal Coatings on Different Substrates during High Temperature Treatment in Nitrogen Atmosphere
Dr. Lutz-Michael Berger, Fraunhofer IKTS; Ms. Kerstin Gnauck, Fraunhofer IKTS; Dr. Susan Conze, Fraunhofer IKTS

4:50 PM

HVOF Applied ‘Flash’ Coatings for Hard Chrome Replacement Application of Hydraulic Rods
Mr. Jonathan Gutleber, Oerlikon Metco (US); Mr. Ville Eronen, Oerlikon Metco Europe GmbH; Dr. Guido Reisel, Oerlikon Metco WOKA GmbH