Cold Spray Process Fundamentals, Simulation, and Particle Impact III

Monday, May 5, 2025: 3:30 PM-5:10 PM
Room 17 (Vancouver Convention Centre)
Dr. Julio Villafuerte, PhD, P.Eng, Centerline (Windsor) Limited
3:30 PM
Cold Spray Additive Manufacturing: Spray Angles, Microstructure, and Properties
Michael Robert Kracum, Sandia National Laboratories; Dr. Christopher Roper, Sandia National Laboratories; Jacob Williamson, Sandia National Laboratories
3:50 PM
Employing Computational-Mathematical Techniques for Optimizing Cold Spray Deposition Efficiency
Dr. Amir Ardeshiri Lordejani, Politecnico di Milano; Mr. Kiarash Tabesh, Politecnico di Milano; Mr. Romario Aldrian Wicaksono, Politecnico di Milano; Prof. Mario Guagliano, Politecnico di Milano; Prof. Sara Bagherifard, Politecnico di Milano
4:10 PM
Feedstock modification and microstructural characterisation of Cold Spraying of Inconel 718
Mr. Parcelino Sudigdo, TWI Ltd
4:30 PM
Addressing nozzle clogging in cold spray processes through process emission detection and simulation
Mr. Sascha Power, Saarland University; Mr. Jakob Luis Köntopf, Technische Universitaet Berlin; Mr. Thomas Braun, Technische Universitaet Berlin; Dr. David Böttger, Fraunhofer IZFP; Mr. Nizamettin Dengiz, Fraunhofer IZFP; Dr. Thomas Waschkies, Fraunhofer IZFP; Prof. Eckart Uhlmann, Fraunhofer IPK, Technische Universitaet Berlin; Prof. Bernd Valeske, Saarland University, Fraunhofer IZFP
See more of: Fundamentals / R&D
<< Previous Session | Next Session >>