Novel Coatings - High Entropy Alloys, Nanomaterials, etc. III

Wednesday, May 7, 2025: 10:30 AM-11:50 AM
Room 2 (Vancouver Convention Centre)
Dr. Richard Trache, Treibacher Industrie AG and Dr. Ingor Baumann, TU Dortmund University
10:30 AM
Microstructural-mechanical property correlation via nanoindentation mapping in CoCrFeNiMo0.5 high-entropy alloy powder and cold spray coating
Dr. Ashok Meghwal, Swinburne University of Technology; Dr. Samuel Pinches, Swinburne University of Technology; Dr. Surinder Singh, Swinburne University of Technology; Dr. Martin Nicolaus, Leibniz Universität Hannover; Prof. Kai Moehwald, Leibniz Universität Hannover; Prof. Hans J. Maier, Leibniz Universität Hannover; Prof. Paul Munroe, University of New South Wales; Prof. Christopher C. Berndt, Swinburne University of Technology; Prof. Andrew Ang, Swinburne University of Technology
10:50 AM
A novel super-fine nanograin Al2CoCrFeNi coating deposited via the suspension high velocity air fuel (HVAF) spraying method
Mehdi Hourmand, University of New South Wales; Dr. Ashok Meghwal, Swinburne University of Technology; Mr. Ecio Bosi, Swinburne University of Technology; Mr. Stefan Björklund, University West, Department of Engineering Science; Shrikant Joshi, University of Limoges; Prof. Christopher C. Berndt, Swinburne University of Technology; Prof. Andrew Siao Ming Ang, Swinburne University of Technology; Prof. Paul Munroe, University of New South Wales
11:10 AM
Mechanical, Metallurgical and Wear Behavior of Thermally-sprayed High Entropy Alloy Coating on Al7075 Substrate for Aerospace Applications
Dr. Akash vyas, Ph.D, University of Alberta; Dr. Pankaj Kumar, University of Alberta; Mr. Mohammad Aatif Qazi, University of Alberta; Dr. Maria Ophelia Jarligo, University of Alberta; Dr. Mostafa yakout, University of Alberta; Dr. André McDonald, University of Alberta
11:30 AM
Optimizing the potential of AlCoCrFeNi high-entropy alloy: EHLA-driven composite coating for tribological applications
Dr. Ashok Meghwal, Swinburne University of Technology; Mr. Bruno Felipe Andrade Bezerra, Swinburne University of Technology; Mr. Hank Lloyd, Swinburne University of Technology; Mr. Ecio Bosi, Swinburne University of Technology; Prof. Paul Munroe, University of New South Wales; Prof. Christopher C. Berndt, Swinburne University of Technology; Prof. Andrew Ang, Swinburne University of Technology
See more of: Fundamentals / R&D
<< Previous Session | Next Session >>