Shape Memory Home
Exposition
To Register
ASM Homepage
Back to Main Search
Poster Session
Location: Tsukuba International Congress Center
(Please check final room assignments on-site).
Session Description
:
13.2
NiTi-Based Damping of Long Overhanging Tools in Machining Processes
13.3
Osteoblast Proliferation and Mineralization on Oxygen and Sodium Plasma Implanted Nickel Titanium Shape Memory Alloy
13.4
Using Shape Memory Alloys for Joint Without a Gap in the Crane Rail
13.6
Design Diagram for SMA Actuators Integrated in a Morphing Wing Structure
13.7
In-Vitro Testing of a New Superelastic Sternum Closure Component
13.9
Influence of Al Concentration on Deformation Behavior and Fracture Mode of Fe-30Mn-6(Si, Al) Alloys
13.10
Phase Constitution and Mechanical Properties of Ti-Sn Alloys Containing 3d Transition Metal Elements
13.13
Phase Constitution and Mechanical Properties of Near-Eutectoid Ti-Au Alloys Containing 3d Transition Metal Elements
13.15
Development of Multi-functional Ferromagnetic Shape Memory Alloys by means of Melt Spinning Technique
13.16
Design and Fabrication of NiTi Shape Memory Alloy Thin Film Sensor Micro-Array for Detection of Infrared Radiation
13.17
Texture of Cold-Drawn Wire of Ti-Nb-Al Shape Memory Alloy
13.18
Plate Variant Combination of 10M and 14M Martensites in Ni-Mn-Ga Ferromagnetic Shape Memory Alloy
13.20
A Novel Super-elastic Spinal Implant For Progressive Deformity Correction: In-vivo Demonstration In Goat Model
13.21
Mechanical Properties of Ti-Mo Base Ternary Alloys
13.22
SMA Micro Pump Chip to Flow Liquids and Gases
13.23
SMA Micro Switching Valve Chip for Biochemical IC Family
13.24
NiTi SMA Wires Subjected to Rotary Bending Fatigue Tests
13.26
Cold Workability and Shape Memory Behavior of Ti-Ni-Zr-Ta Alloys
13.27
Superelasticity in Manganese Copper Alloy Single Crystals
13.28
Functional-Anisotropic Shape Memory Alloy Fiber and Differential Servo Actuator
13.29
Polymerized Hexamethyldisilazane Coated on Equiatomic TiNi Shape Memory Alloy using DC-Pulsed Plasma Enhanced Chemical Vapor Deposition
13.30
Development of Lumbago Prevent Apron Using Ti-Ni Superelastic Alloy
13.31
Characterization of Porous NiTi Shape Memory Alloys Fabricated by Capsule-Free Hot Isostatic Pressing by Electrochemical Impedance Spectroscopy
13.32
Investigation of Barkhausen Noise in Ni2MnGa
13.33
Spring Energy Storage Using Copper-Based Single Crystal SMAs
13.34
Effect of Cu Addition on Shape Memory Characteristics and Internal Structure of Ti-Ni-Pd Alloy
13.35
Shape Memory Characteristics of Fe-30Mn-5Si-1Al and Fe-28Mn-5Si-1Al-5Cr Alloys
13.36
Magnetic Properties and Microstructures of Ni
2
Mn(Ga
x
Al
1-x
) Shape Memory alloys
13.38
Effect of Nb Addition on Cold Workability and Transformation Temperature of Ti-49.5Ni-15Zr High-Temperature Shape Memory Alloy
13.39
SME and TWSME Study after Thermomechanical Training of Strain-Aged in Ti-Ni Alloy
13.40
Electroplastic Deformation Effects in Ultrafine-Grained Shape Memory TiNi Alloy
13.41
Shape Memory Properties of TiAu Base Alloys and Composites
13.43
Character Features of Spherical Segments Fracture from Shape Memory Alloy
13.44
Shape Memory Composite with SMA and SMP
13.46
Electron microscopy study of Ti-Pt high temperature shape memory alloy
13.48
On the Role of Carbides during Thermomechanical Treatments and Related Microstructural Evolution in NiTi Shape Memory Alloys
13.49
Electron microscopy study of multistage martensitic transformation in aged Ni-rich Ti-Ni alloys
New Method for Improving Properties of SMA Coil Springs
32.1
Thermoelastic Phase Transformation in TiNi alloys by Instrumented nanoindentation
