Welding3
Welding and Joining III

Tuesday, June 17, 2014: 1:00 PM-5:30 PM
Daytona 2 (Gaylord Palms Resort )
Session Chair:
Mr. Gary Coleman
1:00 PM
Welding3.1
Near-Net-Shape Manufacturing By Linear Friction Welding
Mr. B. Flipo, TWI Ltd; Dr. M. J. Russell, TWI Ltd; Mr. C. Glazebrook, Constellium LLC
1:30 PM
Welding3.2
Nickel Superalloy Weld Qualities and Properties Achieved Using Low Heat Input Arc and Laser Welding Processes
Dr. Richard Freeman, TWI Ltd
2:00 PM
Welding3.3
Investigation of High Temperature Flowability of Nickel-Based Braze Using Capillary Holes
Mr. Eoin Hinchy, University of Limerick; Dr. David Tanner, University of Limerick; Prof. Mike Pomeroy, University of Limerick
2:30 PM
Welding3.4
Manufacturing of an Advanced Wing Spar By FSW
Dr. Sabine Spangel, Aleris Rolled Products Germany GmbH; Dr. Matthias Miermeister, Aleris Rolled Products Germany GmbH; J. Gijbels, Aleris Rolled Products Germany GmbH; Mr. Fernando Fernandez, Embraer; Mrs. Danielle Nunes, Embraer; Mr. Marcos Miyazaki, Embraer
3:00 PM
Break
3:30 PM
Welding3.5
Friction STIR Welding of DIS-Similar Titanium Alloys
Dr. Daniel G. Sanders, The Boeing Company; Prof. M Ramulu, University of Washington; Mr. Todd Morton, The Boeing Company; Mr. Marc Petersen, The Boeing Company; Ms. Neha kulakarni, University of Washington
4:00 PM
Welding3.6
Mechanical behaviour of Friction Spot Welded Joints in 2198-T8 Aluminium Alloy Sheets
G. Pieta, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics; Dr. Jorge F. dos Santos, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics; Dr. Thomas Gabriel Rosauro Clarke, Universidade do Rio Grande do Sul; T.R. Strohaecker, Universidade do Rio Grande do Sul
4:30 PM
Welding3.7
A Comparison Between the Deformation Behaviour of Dissimilar AA2024-T3/AA7050-T7651 Welds Produced By Stationary Shoulder Friction Stir Welding and Standard Friction Stir Welding
Mr. Alessandro Barbini, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics; Mr. Jan Carstensen, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics; Mr. Marcos Miyazaki, Embraer; Mr. Fernando Fernandez, Embraer; Dr. Jorge F. dos Santos, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics; Prof. Norbert Huber, Helmholtz-Zentrum Geesthacht GmbH, Institute of Materials Science, Materials Mechanics
5:00 PM
Welding3.8
Brazing of C/C Composites and Ni-Based Alloy with Nb Interlayer
Prof. Toshi-Taka Ikeshoji, Tokyo Institute of Technology; Mr. Tatsuya Tokunaga, Tokyo Institute of Technology; Prof. Akio Suzumura, Tokyo Institute of Technology; Prof. Takahisa Yamazaki, Tokyo Institute of Technology
See more of: Welding and Joining
<< Previous Session | Next Session >>