Titanium4
Processing IV

Tuesday, June 17, 2014: 1:00 PM-5:00 PM
Tallahassee 3 (Gaylord Palms Resort )
Session Chair:
Dr. John Foltz
1:00 PM
Titanium4.1
Hearth Melt Processes for Recycling Titanium Alloys
Dr. Bala Cherukuri, RTI International Metals Inc; Mr. Joe Piccioni, RTI International Metals Inc; Mr. Marvin Schott, RTI International Metals Inc; Mr. Shane Probst, RTI International Metals Inc; Mr. Gary Urso, RTI International Metals Inc; Dr. Padu Ramasundaram, RTI International Metals Inc; Dr. Sesh Tamirisa, RTI International Metals Inc; Mr. Blaine Salvador, RTI International Metals Inc
1:30 PM
Titanium4.5
Manufacturing Affordability Associated with Welding and Forming of ATI 425® Alloy
Dr. Luis Ruiz-Aparicio, ATI; Mr. Thomas Fisk, Valley Metals LLC; Mr. Roland Wheeler, Valley Metals LLC
2:00 PM
Titanium4.3
Effect of Elevated Temperature Exposure on Mechanical Properties of Ti-6242S
Mr. W. John Porter, University of Dayton Research Institute; N. D. Schehl, University of Dayton Research Institute; Dr. Adam L. Pilchak, Air Force Research Laboratory; Dr. Dennis J. Buchanan, University of Dayton Research Institute; K. Jata, Air Force Research Laboratory; Reji John, Air Force Research Laboratory
2:30 PM
Titanium4.4
Influence of Nitrogen Plasma Immersion Ionic Implantation (N-PIII) in Properties of Ti-6Al-4V
Dr. Susana Zepka, Technology Institute of Aeronautics; Dr. Maria M. da Silva, Instituto Tecnologico de Aeronautica; Dr. Danieli Reis, Federal University of São Paulo; Dr. Mario Ueda, National Institute for Space Research; Dr. Luc Pichon, Université de Poitiers; Ms. Tarcila Sugahara, Federal University of São Paulo
3:00 PM
Break
3:30 PM
Titanium4.2
The Effect of Heat Treatment and Surface Engineering in Creep Behavior of Ti-6Al-4V Alloy
Dr. Danieli Reis, Federal University of São Paulo; Prof. Adriano Reis, Instituto Tecnológico de Aeronáutica; Dr. Miguel Barboza, São Paulo University; Dr. Francisco Piorino Neto, Departamento de Ciência e Tecnologia Aeroespacial; Dr. Javier Oñoro, Universidad Politécnica de Madrid
4:00 PM
Titanium4.6
Evaluation of Tribological and Fatigue Properties of a Near-β Titanium Alloy for Aerospace Applications
Ms. K. Farokhzadeh, University of Windsor; Mr. J. Qian, University of Windsor; Dr. A. Edrisy, University of Windsor
4:30 PM
Titanium4.7
Impact of Residual Stress on the Ingress of Oxygen in Ti-6242S
Dr. Jaimie Tiley, Air Force Research Laboratory, Wright Patterson Air Force Base; M. Kirby, Air Force Research Laboratory, Wright Patterson Air Force Base; T. Daboika, Air Force Research Laboratory, Wright Patterson Air Force Base; Dr. Reji John, Air Force Research Laboratory, Wright Patterson Air Force Base; Dr. Soumya Nag, University of North Texas; A. Behera, University of North Texas; Prof. Rajarshi Banerjee, University of North Texas
See more of: Titanium Alloy Technology
<< Previous Session | Next Session >>