Poster Session

Tuesday, September 14, 2021: 4:00 PM-5:30 PM
Exhibit Hall 1 (America's Center)
Materials Behavior & Characterization: Modeling of Neutron Transmission spectra from single crystal to polycrystal
Dr. Luc Dessieux, PhD, ORNL
Materials Behavior & Characterization: Permittivity on a Range of ZIRCAR Ceramics Alumina Products
Mr. David Hamling, Zircar Ceramics, Inc.; Mr. Phil Hamling, Zircar Ceramics, Inc.
Materials Behavior & Characterization: Innovative technique for obtaining water absorption of fine aggregates and its relationship with the mineralogical characteristics and mechanical performance of mortars.
Mr. Daniel Puche Gómez, Universidad Nacional de Colombia Sede Medellín; Mrs. Diana Marcela Gómez Cano, UNIVERSIDAD NACIONAL DE COLOMBIA SEDE MEDELLÍN; Mr. Yhan Paul Arias, Universidad Nacional de Colombia Sede Medellín; Mr. Juan C. Ochoa Botero, UNIVERSIDAD NACIONAL DE COLOMBIA SEDE MEDELLÍN; Mr. Roberto Andés Bernal Correa, UNIVERSIDAD NACIONAL DE COLOMBIA SEDE ORINOQÍA
Materials Behavior & Characterizatio: Case study- Effect of Axle Oil characteristics on High Cycle Fatigue Bench Test of Crown Wheel Pinion Gear set
Mr. Yathish Rao, Industry Professional
Metals, Ceramics and Composites: Electrochemical Brush Plating as a Means for Plating Nickel, Metal Matrix Composite Materials, and Plating on Titanium
Dr. Joshua Thomas, SIFCO Applied Surface Concepts; Mrs. Danijela Milosevic-Popovich, SIFCO ASC
Functional Materials and Structures: Morphing metallic honeycomb structures using as bearing layer and protective layer for concrete roads of the airfield
Mr. XiangWen Xiong, International WYNNBEAR Advanced Innovation, The US/CHN
Sustainable Materials: Sustainable materials, optimized structure, and process of a novel overall load-bearing EEM honeycomb structure
Mr. XiangWen Xiong, International WYNNBEAR Advanced Innovation, The US/CHN
Additive Manufacturing: Segregation and Microstructural Study on the Oxidation Behavior of Additively Manufactured Inconel 625
Ms. Sedigheh Rashidi, University of Akron; Mr. Owen Sartele, University of Akron; Dr. Amit Pandey, University of Akron; Dr. Rajeev Gupta, University of Akron
Additive Manufacturing: Understanding the Effects of Thermal Processing on Designer Aluminum Alloys for Additive Manufacturing
Mr. Jack Grubbs, Worcester Polytechnic Institute; Dr. Kyle Tsaknopoulos, Worcester Polytechnic Institute; Dr. Matthew Siopis, U.S. Army CCDC Army Research Laboratory; Prof. Danielle Cote, Worcester Polytechnic Institute
IMS: Measuring Solidification Boundaries using a Moving Thermocouple
Dr. Bryce Hill, Montana Technological University
JASM: DISSIMILAR WELDING OF NEW HIGH OXIDATION MATERIAL – THOR™ 115 WITH GRADE T/P92
Dr. Michal Urzynicok, ZELKOT
Additive Manufacturing: Additive Manufacturing of Copper-Bearing High-Strength Low-Alloy Steels using Laser Powder Bed Fusion with Post-Heat Treatments
Dr. Soumya Sridar, University of Pittsburgh; Dr. ZhangWei Wang, Max-Planck-Institut für Eisenforschung GmBH; Mr. Yingjie Wu, University of Pittsburgh; Prof. Wei Xiong, University of Pittsburgh
See more of: Posters
<< Previous Session | Next Session >>