Poster Session

Thursday, May 27, 2021: 12:00 PM-1:15 PM
Understanding the influence of high velocity thermal spray techniques on the properties of different WC-based coatings
Ms. A. Garfias, Thermal Spray Centre (CPT), University of Barcelona; Dr. V. Albaladejo-Fuentes, Thermal Spray Centre (CPT), University of Barcelona; Dr. S. Dosta, Thermal Spray Centre (CPT), University of Barcelona; Dr. J. Sánchez, Thermal Spray Centre (CPT), University of Barcelona; Dr. I. G. Cano, Thermal Spray Centre (CPT), University of Barcelona
Single-Particle Deposition of Polymeric Materials by Cold Gas Spray
Ms. N. Salazar, Thermal Spray Centre (CPT), University of Barcelona; Dr. A.M. Martos, Thermal Spray Centre (CPT), University of Barcelona; Dr. S. Dosta, Thermal Spray Centre (CPT), University of Barcelona; Dr. I. G. Cano, Thermal Spray Centre (CPT), University of Barcelona
Suspension spraying tip: high molecular weight solvent
Dr. Jan Cizek, Institute of Plasma Physics of the Czech Academy of Sciences; Mr. Daniel Dukovsky, Brno University of Technology; Dr. Radek Musalek, Institute of Plasma Physics of the Czech Academy of Sciences; Dr. Jan Medricky, Institute of Plasma Physics of the Czech Academy of Sciences; Mr. Tomas Tesar, Institute of Plasma Physics of the Czech Academy of Sciences; Dr. Frantisek Lukac, Institute of Plasma Physics of the Czech Academy of Sciences; Dr. Tomas Chraska, Institute of Plasma Physics of the Czech Academy of Sciences
Microstructural evolution of carbides and its effect on tribological properties of SAPS or HVOF sprayed NiCr-Cr3C2 coatings
Dr. Qi. Liu, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University; Prof. Yu Bai, State Key Laboratory for Mechanical Behavior of Materials
Diffusion simulation in SUS 430 stainless steel interconnect with a MnCu coating at 800 ºC
Dr. Kang Yuan, BGRIMM Technology Group; Prof. Shujiang Geng, School of Metallurgy, Northeastern University
Next Generation Axial III Torch
Mr. Ash Kamble, Northwest Mettech Corporation
Investigation of Mechanical Properties of Twin Wire Arc Repair of Cast Iron Components
Mr. Kyle P DePalma, Rochester Institute of Technology; Mr. Mark Walluk, Rochester Institute of Technology; Dr. L. P. Martin, PhD, Rochester Institute of Technology; Ms. Kristi Sisak, Rochester Institute of Technology
Design of cold spray nozzles for inner wall polymer coating fabrication
Mr. Yuxian Meng, Tohoku University; Dr. Hiroki Saito, Tohoku University; Dr. Chrystelle A. Bernard, Tohoku university; Prof. Yuji ICHIKAWA, Tohoku University; Prof. Kazuhiro OGAWA, Tohoku University
The influence of the substrate topography on the plasma jet flow and particle deposition as a determining factor of Thermal Barrier Coatings (TBCs) build-up mechanisms in plasma spraying
Mr. Tomasz Kiełczawa, Warsaw University of Technology; Dr. Pawel Sokolowski, Warsaw University of Technology; Ms. Aleksandra Małachowska, Warsaw University of Technology
See more of: Posters