Wear, Corrosion and Tribology II-b

Thursday, May 27, 2021: 10:15 AM-12:00 PM
Dr. Lutz-Michael Berger, Fraunhofer Institute for Materials and Beam Technology and Dr. Giovanni Bolelli, University of Modena and Reggio Emilia
10:15 AM
Investigation of microstructural and tribological behavior of (CrMnFeCoNi)Alx high entropy alloy coating developed by High Velocity Oxy-Fuel (HVOF)
Mr. Payank Patel, Concordia University, Montreal, Canada; Mr. Amit Roy, Concordia University, Montreal, Canada; Dr. Navid Sharifi, Concordia University, Montreal, Canada; Ms. Kelly Harrington, Pratt & Whitney; Dr. Pantcho Stoyanov, Concordia University, Montreal, Canada; Prof. Richard R Chromik, McGill university; Prof. Christian Moreau, Concordia University, Montreal, Canada
10:30 AM
Tribological and corrosion behaviour of HVOF sprayed Cr3C2-NiCr with nickel cladded graphite and hexagonal boron nitride
Prof. Matthias Oechsner, TU Darmstadt, Center for Structural Materials; Dr. Tom Engler, TU Darmstadt, Center for Structural Materials; Dr. Herbert Scheerer, TU Darmstadt, Center for Structural Materials; Mr. Youngkwang Joung, TU Darmstadt, Center for Structural Materials; Prof. Kirsten Bobzin, Surface Engineering Institute, RWTH Aachen University; Mr. Wolfgang Wietheger, Surface Engineering Institute, RWTH Aachen University; Dr. Martin Andreas Knoch, Surface Engineering Institute, RWTH Aachen University; Mr. Marvin Schulz, Surface Engineering Institute, RWTH Aachen University
10:45 AM
Microstructure and ablation performance of dense ZrC-MoSi2 coatings by VLPPS
Mr. Di Wang, State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University; Dr. Xiao-Tao Luo, State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University; Prof. Chang-Jiu Li, State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University
11:00 AM
Room and elevated temperature sliding wear of high-velocity oxyfuel sprayed Diamalloy3001 coatings
Dr. Venkata Naga Vamsi Munagala, McGill university; Dr. Sima A. Alidokht, McGill university; Ms. Yu Gao, McGill university; Dr. Navid Sharifi, Concordia University; Ms. Kelly Harrington, Pratt & Whitney; Dr. Pantcho Stoyanov, Pratt & Whitney; Prof. Christian Moreau, Concordia University; Prof. Richard R Chromik, McGill university
11:15 AM
Mechanical and microstructural properties of post-treated Zn4Al sprayed coatings using twin wire arc spraying
Prof. Wolfgang Tillmann, TU Dortmund University; Mr. Mohamed Abdulgader, Institute of Materials Engineering, Technische Universität Dortmund; Mr. Leif Hagen, TU Dortmund University; Prof. Dirk Biermann, TU Dortmund University; Dr. Andreas Wirtz, TU Dortmund; Prof. Frank Walther, TU Dortmund; Mr. Michael Peter Milz, TU Dortmund; Mrs. Alina Timmermann, TU Dortmund
11:30 AM
Cost-Effective Suspension Plasma Sprayed Yttria Coatings for Applications in the Semiconductor Industry
Dr. Richard Trache, Treibacher Industrie AG; Dr. Rafael Oliveira da Silva, Treibacher Industrie AG
11:45 AM
Effect of Particle Scale Effect on the Erosion Behavior of Cascaded Arc Plasma Spray-Deposited Coatings
Mr. Maxence GOMBAULT, University of Limoges, CNRS, IRCER, IRT Saint-Exupéry; Dr. Simon Goutier, University of Limoges, CNRS, IRCER; Dr. Christophe Chazelas, University of Limoges, CNRS, IRCER; Prof. Armelle Vardelle, University of Limoges, CNRS, IRCER; Dr. Julien ESCOBAR, IRT Saint-Exupéry; Dr. Sophie SENANI, SAFRAN TECH; Dr. Aurelien Joulia, SAFRAN TECH