ITSC Poster Session

Supply chain development for thermal sprayed coatings on Airbus Helicopters parts
Romain Lucchini, Airbus Helicopters

Evaluation of diffusion processes in Thermal Barrier Coatings to assess the life cycle
Mrs. Maria Fedorova, Technological systems for protective coatings; Dr. Lev Baldaev, Technological systems for protective coatings

Thermal spray coatings for components of heavy-duty gas turbine and analysis of main issues connected to their application
Maria Ulitina, Technological systems for protective coatings; Dr. Lev Baldaev, Technological systems for protective coatings; Roman Vasin, Technological systems for protective coatings

Smart Coating Technology: A Glaze-Based Surface with Self-Healing Capabilities
Mr. Andre Renan Mayer, Concordia University; Prof. Christian Moreau, Concordia University; Prof. Pantcho Stoyanov, Concordia University

Investigation of the interaction between HVOF flames and surfaces based on chemiluminescence
Dr. Deog Gyun Cho, Jeonbuk National University; Jong Geun Bae, Jeonbuk National University; Hyeon Mi lim, Jeonbuk National University; Se Youn Moon, Jeonbuk National University

Modeling the formation of thermal spray coatings on a rough substrate
Mr. Behrouz Haghighi, University of Toronto; Prof. Mohammad Passandideh-Fard, Ferdowsi University of Mashhad; Prof. Javad Mostaghimi, University of Toronto

Suspension High-Velocity Oxy-Fuel (S-HVOF) Spraying with a Liquid-Fueled Torch
Mr. Lucas Grange, University of Limoges, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315; Dr. Andre C. Liberati, University of Limoges, CNRS, Institut de Recherche sur les C ramiques (IRCER), UMR 7315; Mr. Nouhoum Bagayoko, University of Limoges, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315; Dr. Francis Monerie-Moulin, Safran Tech; Dr. Aurélien Joulia, Safran Tech; Dr. Alain Denoirjean, University of Limoges, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Protheïs/SAFIR

Reshaping Thermal Spraying: Explainable Artificial Intelligence Meets Plasma Spraying
Prof. Kirsten Bobzin, Surface Engineering Institute, RWTH Aachen University; Dr. Hendrik Heinemann, Surface Engineering Institute, RWTH Aachen University; Mr. Marvin Erck, Surface Engineering Institute, RWTH Aachen University; Mr. Gabi Nassar, Surface Engineering Institute, RWTH Aachen University

Heterojunction coatings of non-precious metals prepared by plasma spray for water splitting
Mr. Jian WANG, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Dr. Taikai LIU, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Dr. Chen SONG, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Changguang DENG, Institute of New Materials, Guangdong Academy of Science; Prof. Chunming DENG, Institute of New Materials, Guangdong Academy of Science; Prof. Min LIU, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Ms. Xinge JIANG, Université de Technologie de Belfort-Montbéliard; Prof. Hanlin LIAO, Universit de Technologie de Belfort-Montb liard

Characterization of advanced thermal barrier coatings
Hossein Shahbazi, Portech Ltd.; Ehsan Alirezaei, Portech Ltd.

Effects of Different Powder Feeding Rates on the Microstructure and Erosion Resistance of Plasma-PhysicaI Vapor Deposition Thermal Barrier Coatings
Dr. Ziqian Deng, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Min LIU, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Changguang DENG, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Chunming DENG, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Xiaofeng Zhang, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology

Application of multilayer coatings in the waste incinerator ZEVO Pilsen
Dr. Zdeněk Česánek, Research and testing Institute in Pilsen Ltd.; Mr. Jiří Frank, Research and testing Institute in Pilsen Ltd.; Mr. Jakub Antoš, Research and testing Institute in Pilsen Ltd.; Mr. Tomas Taranda, Research and testing Institute in Pilsen Ltd.; Dr. Marek Vostřák, Research and testing Institute in Pilsen Ltd.; Dr. Jan Hruska, SVÚM, a.s.; Mr. Pavel Veselý, Research and testing Institute in Pilsen Ltd.

Microstructure, Mechanical and Thermal Properties of Yttria-Tantala-Stabilized Zirconia Coatings Prepared from Suspension Plasma Spraying
N/A Maria Catalina GALEANO CAMACHO, Centro de Investigación y de Estudios Avanzados del IPN, Unidad Querétaro; N/A Andrea Rios Ramos, Centro de Investigacion y de Estudios Avanzados - CINVESTAV; Mr. Jhon Sebastian Perez, Université de Limoges, IRCER, European Ceramic Center; Dr. Juan Muñoz Saldaña, Centro de Investigacion y de Estudios Avanzados del IPN - CINVESTAV; N/A Helene AGEORGES, Univ. Limoges, CNRS, IRCER

The performance comparison of APS and PS-PVD environmental barrier coatings
Prof. Xiaofeng Zhang, Institute of New Materials, Guangdong Academy of Science;National Engineering Laboratory for Modern Materials Surface Engineering Technology; Prof. Min Liu, Institute of New Materials, Guangdong Academy of Sciences; Dr. Ziqian Deng, Institute of New Materials, Guangdong Academy of Sciences; Prof. Chunming Deng, Institute of New Materials, Guangdong Academy of Sciences; Prof. Changguang Deng, Institute of New Materials, Guangdong Academy of Sciences