Poster Session

Tuesday, May 17, 2022: 5:30 PM-7:00 PM
Grand Pacific Ballroom (Westin Carlsbad Resort)
Crystal plasticity modelling framework for fully implicit time integration of coupled phase transformation and slip in shape memory alloys
Mr. Rupesh K. Mahendran, Georgia Institute of Technology; Prof. Aaron Stebner, Georgia Institute of Technology; Surya R. Kalidindi, Georgia Institute of Technology
Effects of thermal cycling on Active Af of nickel-titanium superelastic wires
Dr. Dimitri ASLANIDIS, Lumenous Peiertech; Mr. Stepanus Widjaja, Lumenous Peiertech; Mr. Godric Chen, Lumenous Peiertech; Mr. Chenbing HUANG, Lumenous Peiertech; Mr. Todd Dickson, Lumenous Device Technologies, Inc.
Quantitative XRD and microstructure characterization of Ni-Ti-Cu shape memory alloys
Dr. Jannis Lemke, SAES Getters S.p.A.; Dr. Federico Gallino, SAES Getters S.p.A.; Dr. Alberto Coda, SAES Getters S.p.A.
Role of nickel-titanium wire surface on laser marking
Dr. Dimitri ASLANIDIS, Lumenous Peiertech; Mr. Chenbing HUANG, Lumenous Peiertech; Mr. Stepanus Widjaja, Lumenous Device Technologies, Inc.; Mr. Godric Chen, Lumenous Peiertech; Mr. Todd Dickson, Lumenous Device Technologies, Inc.
Studying HT-SMAs in compression
Dr. Alberto Coda, SAES Getters S.p.A.; Mr. Matteo Cresci, SAES Getters S.p.A.; Mr. Luca Fumagalli, SAES Getters S.p.A; Dr. Jannis Lemke, SAES Getters S.p.A.
Combination of solid and porous Nitinol implants in surgical treatment of extensive post-excision thoracic defects in cancer patients
Dr. Evgeniy Topolnitskiy, Siberian State Medical University; Dr. Timofey Chekalkin, TiNiKo Co., Tomsk State University; Dr. Ekaterina Marchenko, Tomsk State University; Dr. Yuri Yasenchuk, Tomsk State University; Dr. Ji-Hoon Kang, TiNiKo Co.; Dr. L'Hocine Yahia, Polytechnique Montreal
High Cycle Fatigue Evaluation of Laser Cut Nitinol Coupons at Varying Mean Strains
Mr. Matthew Ziebol, Medtronic; Mr. Curtis Goreham-Voss, PhD, Medtronic
Nitinol Continuously Flat-Rolled Sheet and their Properties
Mr. Andreas Keck, G.RAU GmbH & Co. KG; Mrs. Katarzyna Plaskonka-Weisenburger, G.RAU GmbH & Co. KG; Dr. Jochen Ulmer, EUROFLEX GmbH; Dr. Alan R. Pelton, G.RAU Inc.; Dr. Stefan Knoll, G. Rau GmbH & Co. KG
An elastocaloric air cooler with low-force bending actuation
Mr. Xueshi LI, The Hong Kong University of Science and Technology; Prof. Qingping Sun, The Hong Kong University of Science and Technology
A Comparison of Linear Elastic and Super Elastic Binary Nickle Titanium
Mr. Dave Plumley, Fort Wayne Metals
Influences of Ni/Ti ratio on NiTiTa alloys
Dr. S. Cai, Fort Wayne Metals; Dr. Jeremy E. Schaffer, Fort Wayne Metals
See more of: Poster
<< Previous Session | Next Session >>