Surface Engineering Home      Exposition      To Register      ASM Homepage

			Back to "Surface Engineering Congress" Search	Back to Main Search
Poster Session
Location: Radisson Riverfront Hotel
(Please check final room assignments on-site).
Session Description:
Editor:	Prof. Mark J. Jackson Purdue University, West Lafayette, IN
SES .1		Isothermal Oxidation of Gamma Titanium Aluminide with Ag and Cr Addition
SES .2		Ti - BASED COATINGS FOR DIAMOND DEPOSITION
SES .3		Effectiveness Evaluation of the Titanium Nitride Deposition over Fatigue Life of Sae 4340 Steel
SES .4		Microdispersion of Filler in Rubber:Some Quantitative Aspects by AFM Image Analysis
SES .5		Characterization of Reactively Sputtered Ti-Si-N Films
SES .6		Hydrogen-Accelerated Oxidation of Heat Resistant Steels in High-Temperature Steam Atmosphere
SES .7		Adhesion Enhancement of Thin Film Titanium on Polydimethylsiloxane Using Plasma and Ion Beam Treatment
SES .8		EFFECTIVE DEBYE-WALLER TEMPERATURE PARAMETER OF SUPERIONIC CONDUCTING (AgI)0.8 - (Ag2MoO4)0.2 glass
SES .9		Detection of Surface Cracks in Thin Layered Composite Material Using Low Frequency Vibration Technique’S
SES .10		Machining Difficult-to-Machine Alloys and Specialty Metals Using Next Generation Coated Cutting Tools
SES .11		Pulsed Laser Ablation of CuInSe2 Thin Films for Solar Cells
SES .12		Electron Beam Deposition of CuInSe2 Thin Films
SES .13		Growth and Characterization of CuInxGa1-xSe2 Thin Films
SES .14		Laser Annealing of Flash Evaporated CuInSe2 Thin Films
SES .15		CdS Thin Films Synthesized by Chemical Bath Deposition Techniques
SES .16		Impact of Post-Deposition Annealing and Ion-Implantation of the Properties of CuIn0.75Ga0.25Se2 Thin Films
SES .17		A Taguchi Approach to Optimising CVD Diamond Process for Use on Dental Burs
SES .18		Neural Image Processing of the Wear of Cutting Tools Coated with Thin Films