International Materials Applications & Technologies Conference and Exposition - IMAT (Sept. 12

International Materials Applications & Technologies Conference and Exposition - IMAT (Sept. 12 - 15, 2022)

Gibbs Award Session 1: Honoring Dr. K.T. Jacob, Part 2

Winners of both HTS Competitions Announced

Saturday, September 10, 2022

7:00 AM-5:00 PM

ASM Committee Council Office

Sunday, September 11, 2022

Monday, September 12, 2022

7:00 AM-5:00 PM

ASM Committee Council Office

8:00 AM-9:30 AM

Metallography, Microstructure, and Analysis (MMA) Editorial Board

8:30 AM-10:30 AM

IMAT Author's Coffee

9:00 AM-10:00 AM

Keynote: A More Sustainable Future via Polymer Circularity: Dr. Kathryn Beers, NIST
Session Chair: Dr. Marissa Reigel

9:00 AM-11:00 AM

ASM Past Presidents Meeting

10:00 AM-10:30 AM

Refreshment Break

10:00 AM-6:00 PM

Tuxedo Pickup

10:30 AM-11:30 AM

Distortion Control / Residual Stress (organized by the ASM Heat Treating Society)
Session Chair: Prof. Lesley D. Frame

JASM: Weld Properties & Microstructure
Session Chair: Dr. Zhenzhen Yu and Prof. Wenda Tan

Materials 4.0
Session Chair: Dr. James D. Cotton

Materials, Manufacturing, and Microscopy I
Session Chair: Prof. Ruigang Wang and Dr. Ramana Reddy, Ph.D

Microstructural Characterization I
Session Chair: Dr. Michael E Keeble and Mr. Richard Chinn

10:30 AM-11:50 AM

Emerging Issues in AM
Session Chair: Dr. Andrzej Wojcieszynski

Perspectives for Emerging Professionals I
Session Chair: Dr. Jeff Bunn

Physics- and mechanism-based theory, modeling and simulations I
Session Chair: Dr. Zhi Liang and Dr. Chelsey Hargather, PhD

Thermal Treatments I
Session Chair: Ms. Debbie Aliya, FASM, Mr. Craig D. Clauser, P.E., FASM, Mr. Michael Connelly, FASM, CQE, Mr. Christopher Misorski, FASM and Dr. MariAnne Davis, Ph.D., P.E.

11:10 AM-11:50 AM

Litigation 101 for Failure Analysts I
Session Chair: Dr. Mark Russell, Mr. William Carden, MS, PE, Mr. Kyle T. Minden, P.E. and Mr. Tony Havics, PE

11:30 AM-1:30 PM

ASM Leadership Luncheon

1:00 PM-2:00 PM

Failure Analysis of AM Components
Session Chair: Prof. Jack Beuth

Physics- and Mechanism-based Modeling and Simulations II / Database Development
Session Chair: Dr. Zhi Liang and Dr. Chelsey Hargather, PhD

Surface Heat Treatment (organized by the ASM Heat Treating Society)
Session Chair: Dr. Olga Rowan

1:00 PM-2:20 PM

Perspectives for Emerging Professionals II
Session Chair: Dr. Jeff Bunn

1:00 PM-2:40 PM

Light Metals: Aluminum
Session Chair: Dr. Kumar Sadayappan, Ph.D.

Litigation 101 for Failure Analysts II
Session Chair: Dr. Mark Russell, Mr. William Carden, MS, PE, Mr. Tony Havics, PE and Mr. Kyle T. Minden, P.E.

Thermal Treatments II
Session Chair: Ms. Debbie Aliya, FASM, Mr. Craig D. Clauser, P.E., FASM, Mr. Michael Connelly, FASM, CQE, Mr. Christopher Misorski, FASM and Dr. MariAnne Davis, Ph.D., P.E.

1:20 PM-2:00 PM

Quantification & Simulation of Microstructures
Session Chair: Dr. Dominik Britz

1:20 PM-2:20 PM

Materials, Manufacturing, and Microscopy II
Session Chair: Prof. Ruigang Wang and Dr. Ramana Reddy, Ph.D

1:40 PM-2:40 PM

Alpha Sigma Mu Distinguished Lecture: Industry 4.0 and ICME: The Evolution and Revolution of Materials Science and Engineering: Dr. David Furrer
Session Chair: Prof. Diana A. Lados

2:00 PM-3:00 PM

ASM Awards Policy Committee Meeting

2:30 PM-3:00 PM

Refreshment Break

3:00 PM-4:00 PM

ASM Foundation - Donor Event

3:00 PM-4:20 PM

Fundamental and applications-oriented experimental observations
Session Chair: Dr. Zhi Liang and Dr. Chelsey Hargather, PhD

JASM: NANO Joining
Session Chair: Mr. Edward Fratto and Prof. Anming Hu, Ph.D

Light Metals: Titanium
Session Chair: Dr. Alan Luo

Metallographic Preparation
Session Chair: Dr. Michael E Keeble

Perspectives for Emerging Professionals Panel Discussion

3:00 PM-4:40 PM

Microstructure, Properties and Characterization of AM Materials
Session Chair: Prof. Allison Beese

3:00 PM-5:00 PM

Artificial Intelligence and Machine Learning for Materials
Session Chair: Prof. Michael S. Titus, Ph.D.

Materials Behavior and Properties
Session Chair: Dr. Nilesh Kumar, Ph.D. and Dr. Ramana Reddy, Ph.D

3:00 PM-5:20 PM

Explosions & Fire Failures
Session Chair: Mr. Dan Grice, P.E., Dr. Dale E. Alexander, Ph.D., P.E., Mr. Thomas Kozina, Mr. Mark Hood and Dr. Sean Berg

Fractography (Vol. 12)
Session Chair: Mr. Ronald Parrington, P.E., FASM, Mr. Craig Schroeder, PE, Mr. Mark A. Hineman, P.E., C.W.I. and Mr. David Christie

4:00 PM-5:00 PM

ASM 109th Annual Society Meeting

4:20 PM-5:20 PM

Metallographic Preparation Panel Discussion
Session Chair: Dr. Michael E Keeble and Dr. Daniel Dennies, Ph.D

5:00 PM-7:00 PM

AM&P Editorial Committee

5:20 PM-6:20 PM

ASM International Metallographic Society (IMS) General Membership Meeting

6:30 PM-7:30 PM

ASM Failure Analysis Society (FAS) General Membership Meeting

7:00 PM-10:00 PM

ASM Fellows Induction Ceremony / Reception

7:30 PM-9:00 PM

ASM Failure Analysis Society (FAS) Program Committee Meeting

Tuesday, September 13, 2022

7:00 AM-8:30 AM

Journal of Failure Analysis and Prevention (JFAP) Editorial Board

7:00 AM-9:00 AM

ASM Women in Materials Engineering Breakfast

IMAT Author's Coffee

7:00 AM-5:00 PM

ASM Committee Council Office

7:40 AM-10:00 AM

Fatigue & Fracture I
Session Chair: Mr. William Rossey, Dr. Ty Porter, PhD, PE, Mr. Ryan Haase, P.E., Ms. Emily Bardugon and Dr. Eric Weishaupt, PhD, PE

8:00 AM-8:05 AM

WELCOME/OPENING REMARKS: William Lenling, President, ASM Thermal Spray Society

8:00 AM-9:00 AM

2022 Edward DeMille Memorial Lecture: Modern Physical Metallurgy: Importance, Use of New Tools, and How to Finance the Metallic Materials Enterprise: Dr. Hamish L. Fraser, FASM

8:00 AM-9:20 AM

JASM: Friction Stir Technologies
Session Chair: Dr. Judy Schneider, Ph.D and Prof. Hiroaki Mori

8:00 AM-9:40 AM

AM Process Monitoring and Control: Part 1
Session Chair: Dr. Timothy Horn

Metallic Materials, Alloy Development & Heat Treatment I
Session Chair: Mr. Paul Wilson

Microstructural Characterization II
Session Chair: Dr. Donald Susan, Ph.D. and Dr. Jessica Buckner

8:00 AM-10:30 AM

Introduction to Failure Analysis
Session Chair: Mr. Ronald Parrington, P.E., FASM, Ms. Alexandria Springer, Ms. Gladys Duran, Dr. Charles White, emeritus professor, Mr. James Lane, PE and Dr. David Riegner, Ph.D.

8:05 AM-8:45 AM

KEYNOTE SESSION: Cold Spray Technology in Nuclear Energy Applications

8:20 AM-9:40 AM

Materials for Clean & Renewable Energy
Session Chair: Mr. Alan W. Burgess and Dr. John Shingledecker, Ph.D., FASM

Processing and Applications
Session Chair: Dr. Timothy A. Langan

8:20 AM-10:00 AM

Gibbs Award Session 1: Honoring Dr. K.T. Jacob, Part 1

9:00 AM-10:00 AM

2020 Edward DeMille Memorial Lecture: Additive Manufacturing: Disrupting Global Supply Chains and Enabling Sustainable Development: Dr. Mrityunjay Singh, FASM

TRACK 1: North American Cold Spray Conference - Emerging Applications
Session Chair: Mr. Charles M. Kay

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Market and Applications I
Session Chair: Dr. John Koppes

9:00 AM-11:00 AM

Mini-Materials Camp

9:00 AM-12:00 PM

ASM Finance Committee Meeting

9:00 AM-12:15 PM

DomesDay Competition - Judging (Presentation, Poster, and Aesthetics)

9:15 AM-12:00 PM

MRS Tutorial - Inorganic Solar-Energy Conversion Materials

9:30 AM-10:30 AM

ASM Foundational Informational Session: The Foundation Outreach Kit (How can I/my chapter/my organization do more outreach to students?)

Refreshment Break

10:00 AM-11:00 AM

ASM IDEA Committee Meeting

10:10 AM-11:50 AM

Fatigue & Fracture II
Session Chair: Mr. William Rossey, Dr. Ty Porter, PhD, PE, Mr. Ryan Haase, P.E., Dr. Eric Weishaupt, PhD, PE and Ms. Emily Bardugon

10:30 AM-11:30 AM

AM Process Monitoring and Control: Part 2
Session Chair: Dr. Andrzej Wojcieszynski

JASM: Dissimilar Materials Joining
Session Chair: Prof. Jie Zheng and Prof. Boyd E. Panton

Sustainable Materials & Processes - Recycling, Carbon, Biomass
Session Chair: Prof. John Wolodko

10:30 AM-11:50 AM

Metallic Materials, Alloy Development & Heat Treatment II
Session Chair: Mr. Paul Wilson

NDT as a Tool for Failure Mitigation I
Session Chair: Dr. Erhan Ulvan, Ph.D., P.Eng., FASM, Mr. Brent Fogal, Mr. Pierre DUPONT and Ms. Debbie Aliya, FASM

10:30 AM-12:00 PM

TRACK 1: North American Cold Spray Conference - Applications I
Session Chair: Dr. Kumar Sridharan

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Market and Applications II
Session Chair: Dr. Rogerio S. Lima

10:50 AM-11:50 AM

Sorby Lecture
Session Chair: Dr. Chris Bagnall and Dr. Michael E Keeble

11:00 AM-5:00 PM

Tuxedo Pickup

11:30 AM-1:30 PM

Lunch Break

11:45 AM-2:00 PM

Journal of Materials Engineering & Performance (JMEP) Committee

12:00 PM-1:15 PM

IMAT Technical Advisory Board Meeting

12:00 PM-2:00 PM

Mini-Materials Camp

12:15 PM-1:15 PM

DomesDay Competition – Testing in MTS booth

12:30 PM-1:30 PM

Thermo Fisher Lunch & Learn: Don’t Miss What You Can’t See With BSD

12:30 PM-2:30 PM

ASM Investment and ASM Education Foundation Committee Meeting

1:20 PM-2:20 PM

Archaeological Materials
Session Chair: Mr. George Vander Voort

1:20 PM-2:40 PM

Alloy Design And Process Development for AM: Aluminum Alloys
Session Chair: Dr. Cindy Waters

Materials for Clean & Renewable Energy/Extreme Service Conditions
Session Chair: Mr. Alan W. Burgess

NDT as a Tool for Failure Mitigation II
Session Chair: Dr. Erhan Ulvan, Ph.D., P.Eng., FASM, Ms. Debbie Aliya, FASM, Mr. Pierre DUPONT and Mr. Brent Fogal

Non-Metallics I
Session Chair: Mr. Ronald Parrington, P.E., FASM, Dr. Gregory S. Chojecki, Ph.D., Mr. James Lane, PE and Mr. Larry D. Hanke, P.E.

1:20 PM-3:10 PM

Advanced Manufacturing Panel: Progress and Opportunities
Session Chair: Dr. William Frazier

1:30 PM-2:00 PM

DomesDay Competition – Winner Announced

1:30 PM-3:00 PM

TRACK 1: North American Cold Spray Conference - Fundamentals / R & D I
Session Chair: Ms. Deborah Curtis

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Power Generation
Session Chair: Dr. Sanjay Sampath

1:40 PM-2:20 PM

Sustainable Materials and Processes
Session Chair: Dr. James D. Cotton

1:40 PM-2:40 PM

Ceramic and Composite Materials
Session Chair: Mr. Paul Wilson

2:30 PM-3:30 PM

HTS Strong Bar Competition – Phase 1 - Poster Judging

Refreshment Break

3:00 PM-4:00 PM

Keynote: Sustainable Materials and Process Strategies for the Aircraft of Tomorrow: Dr. Kay Youngdahl Blohowiak, Boeing Research & Technology
Session Chair: Dr. James D. Cotton

3:30 PM-4:30 PM

ASM Foundation Informational Session: Supporting and growing the ASM Materials Camp-Teachers program (Is there one in my area? How can I get one in my area?)

TRACK 1: North American Cold Spray Conference - Applications II
Session Chair: Dr. André McDonald

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Biological Applications
Session Chair: Ms. Irina Downs

4:00 PM-5:30 PM

Fluxtrol Student Research Competition – Phase 1 – Poster Judging

Poster Session

Welcome Reception with the Exhibitors

4:30 PM-5:30 PM

Emerging Professional Student Poster Competition

6:00 PM-7:00 PM

ASM Awards Dinner Cocktail Reception

6:45 PM-7:15 PM

Head Table Line Up

7:00 PM-9:30 PM

ASM Awards Dinner

9:30 PM-11:00 PM

President's Reception

Wednesday, September 14, 2022

6:30 AM-8:30 AM

Journal of Thermal Spray Technology (JTST) Committee

7:00 AM-9:00 AM

IMAT Author's Coffee

7:00 AM-12:00 PM

Tuxedo Drop Off

7:00 AM-5:00 PM

ASM Committee Council Office

7:40 AM-10:20 AM

Strange & Unconventional Failures
Session Chair: Dr. Erhan Ulvan, Ph.D., P.Eng., FASM, Prof. Véronique Vitry, Dr. Charles White, emeritus professor and Dr. Joseph Lemberg, Ph. D., P.E.

8:00 AM-8:05 AM

OPENING REMARKS: Rogerio Lima, Vice President, ASM Thermal Spray Society

8:00 AM-9:20 AM

Coatings and Surface Treatments
Session Chair: Mr. Paul Wilson and Dr. Kay Y. Blohowiak

8:00 AM-10:00 AM

Corrosion and Environmental Degradation I
Session Chair: Dr. Rajeev Gupta and N/A Venkata Bhuvaneswari Vukkum

EDFAS Tutorial - Diffraction in the SEM: What, Why, and How You Can Do This in Your Microscope AND Microelectronic Yield Characterization
Session Chair: Dr. James Demarest

Joint FAS/IMS
Session Chair: Dr. Daniel Dennies, Ph.D, Mr. James Lane, PE and Mr. Burak Akyuz

8:00 AM-4:00 PM

ASM Board of Trustees Meeting

8:05 AM-8:45 AM

KEYNOTE SESSION: Motochondrial Generator Development and Production for Powering Sensors

8:20 AM-9:40 AM

Alloy Design And Process Development for AM: Iron and Nickel Based Alloys
Session Chair: Dr. Timothy Horn

8:40 AM-9:40 AM

Medical / Biomaterials: Driving for delivered patient value
Session Chair: Dr. Othmane Benafan

9:00 AM-10:00 AM

TRACK 1: North American Cold Spray Conference - Applications III
Session Chair: Mr. Luc Pouliot, Eng., M.Sc.A., FASM

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Markets and Applications III
Session Chair: Dr. Andrew Vackel

9:00 AM-2:00 PM

Mini-Materials Camp

9:30 AM-10:30 AM

Refreshment Break

10:30 AM-11:30 AM

Fluxtrol Student Poster Competition Phase 2

10:30 AM-12:00 PM

Panel Discussion: The Circular Materials Economy

TRACK 1: North American Cold Spray Conference - Fundamentals / R & D II
Session Chair: Dr. Eric Irissou

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Novel Flame & Cold Spray Applications
Session Chair: Dr. Bertrand Jodoin

11:30 AM-12:30 PM

HTS Strong Bar Competition – Phase 2 - Testing in Instron booth

11:30 AM-1:30 PM

Alloy Phase Diagram (APD) Committee

Lunch Break

12:00 PM-1:15 PM

ASM Programming Committee Meeting

1:00 PM-3:30 PM

ASM Heat Treating Society (HTS) Board, Committee and Subcommittee Chair Meeting

1:15 PM-3:15 PM

Engineering Impossible Materials: A Listening Session with the Engineering Research Visioning Alliance

1:20 PM-2:00 PM

Solid State AM Processing
Session Chair: Prof. Mathieu Brochu

1:20 PM-2:20 PM

EDFAS Tutorial - Charged Particle Systems: Fundamentals, Trends & Opportunities
Session Chair: Dr. James Demarest

Microstructural Characterization III
Session Chair: Mr. Joseph Quinn and Mr. Michael Engstler

1:20 PM-2:40 PM

Corrosion and Environmental Degradation II
Session Chair: Dr. Rajeev Gupta and N/A Venkata Bhuvaneswari Vukkum

Gears, Shafts, & Bearings I
Session Chair: Mr. Thomas D. Traubert, Mr. Brett Miller, P.E., FASM, Mr. Pierre DUPONT, Dr. Ellen E. Wright, Ph.D., P.E. and Mr. Jake Auliff

Non-Metallics II
Session Chair: Mr. Ronald Parrington, P.E., FASM, Dr. Gregory S. Chojecki, Ph.D., Mr. James Lane, PE and Mr. Larry D. Hanke, P.E.

1:20 PM-3:00 PM

Metallic Materials, Alloy Development & Heat Treatment III
Session Chair: Mr. Paul Wilson

1:30 PM-3:00 PM

TRACK 1: North American Cold Spray Conference - Process
Session Chair: Dr. Jan Cizek

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Aerosol Deposition
Session Chair: Prof. Jocelyn Veilleux

2:30 PM-3:00 PM

Announcement of Winners - Fluxtrol Student Research Competition & HTS Strong Bar Competition

2:30 PM-3:30 PM

Refreshment Break

3:00 PM-4:00 PM

Keynote: Integrated Computational Materials Engineering Impact on Industry and New Frontiers in Digital Transformation: Dr. Jason Sebastian, QuesTek Innovations
Session Chair: Mr. Luc Pouliot, Eng., M.Sc.A., FASM

3:30 PM-4:30 PM

TRACK 1: North American Cold Spray Conference - Applications IV
Session Chair: Mr. Charles M. Kay

TRACK 2: New and Emerging Markets for Thick Films & Coatings: Unconventional Uses of Thermal Spray - Corrosion in Nuclear Industry
Session Chair: Dr. Andrew Vackel

4:00 PM-5:00 PM

Cold Spray Additive Manufacturing
Session Chair: Mr. Edem Dugbenoo

Gears, Shafts, & Bearings II
Session Chair: Mr. Thomas D. Traubert, Mr. Brett Miller, P.E., FASM, Mr. Pierre DUPONT, Dr. Ellen E. Wright, Ph.D., P.E. and Mr. Jake Auliff

Microstructural Characterization IV
Session Chair: Mr. Joseph Quinn and Mr. Michael Engstler

4:00 PM-5:40 PM

Non-Metallics III
Session Chair: Mr. Ronald Parrington, P.E., FASM, Dr. Gregory S. Chojecki, Ph.D., Mr. James Lane, PE and Mr. Larry D. Hanke, P.E.

5:45 PM-7:00 PM

Social Event: Shuttle from Hilton New Orleans to Social Event

6:00 PM-7:00 PM

Off Site: Social Event: Tour the Mardi Gras World Float Den (Weather Permitting)

6:00 PM-9:00 PM

Social Event: Mardi Gras World & Reception at Grand Oaks Mansion

8:15 PM-9:00 PM

Social Event: Return Shuttle from Grand Oaks Mansion to Hilton New Orleans Riverside

Thursday, September 15, 2022

7:00 AM-9:00 AM

IMAT Author's Coffee

7:00 AM-5:00 PM

ASM Committee Council Office

8:00 AM-10:00 AM

Tools & Techniques I
Session Chair: Mr. Adam J Boesenberg, Mr. Joel A. Davis and N/A Edite M. Grendze

8:00 AM-10:20 AM

Manufacturing-Related Failures i
Session Chair: Mr. Aaron Slager, Dr. Charles White, emeritus professor, Mr. Thomas Ackerson, PE, Ms. Christina Powell, Prof. Véronique Vitry, Mr. Aaron Tanzer and Dr. Erik Mueller, P.E.

10:00 AM-11:00 AM

Refreshment Break

10:40 AM-12:00 PM

Tools & Techniques II
Session Chair: Mr. Adam J Boesenberg, Mr. Joel A. Davis and N/A Edite M. Grendze

10:40 AM-12:40 PM

Manufacturing-Related Failures II
Session Chair: Mr. Aaron Slager, Dr. Charles White, emeritus professor, Mr. Thomas Ackerson, PE, Ms. Christina Powell, Mr. Aaron Tanzer and Dr. Erik Mueller, P.E.